TURNING INSERTS | NEGATIVE RAKE
WNMG-UK
General purpose turning, facing and boring. 80° corner with 6 cutting edges. Maximum economy. Good choice for general turning. UK: Lower cutting force geometry for Cast Iron. Edge geometry reduces cutting forces in moderate conditions / lighter cuts.
80º
d
r
s
CUTTING DATA (INCH)
DIMENSIONS (INCH)
CAST IRON
ANSI DESIGNATION
ISO DESIGNATION
feed per rev, f n
d l
s
r depth of cut, a p
K315
K325
WNMG 431-UK
WNMG 080404-UK 1/2 .342 3/16 1/64 .012 - .156 .003 - .012
DPL100620 DPL100621
WNMG 432-UK
WNMG 080408-UK 1/2 .342 3/16 1/32 .016 - .156 .004 - .014
DPL100637 DPL100638
Ordering Example: 20 pcs WNMG 432-UK K315; DPL100637
WNMG-HK
General purpose turning, facing and boring. 80° corner with 6 cutting edges. Maximum economy. Good choice for general turning. HK: Exceptionally broad application range geometry primarily for Cast Iron. Strong cutting edge, excellent durability. Semi- finishing through to roughing.
80º
d
r
s
CUTTING DATA (INCH)
DIMENSIONS (INCH)
CAST IRON
ANSI DESIGNATION
ISO DESIGNATION
feed per rev, f n
d l
s
r depth of cut, a p
K315
K325
WNMG 432-HK
WNMG 080408-HK 1/2 .342 3/16 1/32 .020 - .172 .004 - .016
DPL100622 DPL100623
WNMG 433-HK
WNMG 080412-HK 1/2 .342 3/16 3/64 .031 - .172 .006 - .020
DPL100639 DPL100640
Ordering Example: 20 pcs WNMG 433-HK K315; DPL100639
REFERENCE PAGES
4
6
63
CUTTING SPEED RECOMMENDATIONS
GRADE SELECTION GUIDE
TECHNICAL INFORMATION
36
Powered by FlippingBook