TURNING INSERTS | NEGATIVE RAKE
WNMG-SF
General purpose turning, facing and boring. 80° corner with 6 cutting edges. Maximum economy. Good choice for general turning. SF: Ultra-sharp cutting edge geometry for finishing in Stainless Steels. Low cutting forces and superior workpiece surface finish without burrs.
80º
d
r
s
CUTTING DATA (INCH)
DIMENSIONS (INCH)
M
S
ANSI DESIGNATION
ISO DESIGNATION
MULTI-MATERIAL
depth of cut, a p
feed per rev, f n
d l
s
r
S515
WNMG 431-SF
WNMG 080404-SF 1/2 .342 3/16 1/64 .004 - .062 .003 - .012
DPL100617
WNMG 432-SF
WNMG 080408-SF 1/2 .342 3/16 1/32 .004 - .062 .004 - .016
DPL100634
Ordering Example: 20 pcs WNMG 432-SF S515; DPL100634 NOTE : The primary application area for grade S515 is in stainless steel workpiece materials. S515 is also suitable for use with iron-based, cobalt-based and nickel-based Heat Resistant Super Alloys.
WNMG-SM
General purpose turning, facing and boring. 80° corner with 6 cutting edges. Maximum economy. Good choice for general turning. SM: Keen edge geometry especially for Stainless Steel. Unique edgeline reduces work hardening. Semi-finishing to rough machining.
80º
d
r
s
CUTTING DATA (INCH)
DIMENSIONS (INCH)
STAINLESS STEEL
ANSI DESIGNATION
ISO DESIGNATION
feed per rev, f n
d l
s
r depth of cut, a p
S525
M225
WNMG 331-SM
WNMG 060404-SM 3/8 .257 3/16 1/64 .016 - .109 .004 - .012
DPL100618
DPL100356
WNMG 332-SM
WNMG 060408-SM 3/8 .257 3/16 1/32 .020 - .109 .005 - .016
DPL100619
DPL100359
WNMG 333-SM
WNMG 060412-SM 3/8 .257 3/16 3/64 .031 - .109 .006 - .020
DPL100635
DPL100360
WNMG 431-SM
WNMG 080404-SM 1/2 .342 3/16 1/64 .016 - .141 .004 - .012
DPL100636
DPL100363
WNMG 432-SM
WNMG 080408-SM 1/2 .342 3/16 1/32 .020 - .141 .005 - .016
DPL100648
DPL100364
WNMG 080412-SM 1/2 .342 3/16 3/64 .031 - .141 .006 - .020
WNMG 433-SM
DPL100649
DPL100373
Ordering Example: 20 pcs WNMG 433-SM M225; DPL100649
REFERENCE PAGES
4
6
63
CUTTING SPEED RECOMMENDATIONS
GRADE SELECTION GUIDE
TECHNICAL INFORMATION
35
Powered by FlippingBook