1-800--923-6255 www.dgisupply.ca
Valid until Aug 31st, 2025
CoroDrill® DE10 CoroDrill® DE10, the new best-performing exchangeable-tip drill mastering productive short-hole drilling in all materials. CoroDrill® DE10 is designed for short-hole drilling between diameters 9.00–17.90 mm (0.354–0.705 inch) across all material groups, offering a large cutting data window with high cutting parameters right from the start. The concept includes cylindrical and cylindrical with flat shank types and presents the unique benefit of a single, versatile geometry that covers all materials.
The peak performance of CoroDrill® DE10 is achieved at high feeds and speeds, leveraging its unique geometry, high-performance grades and robust pre-tension clamping interface. Increase your feed by 40% and watch your productivity soar and cost efficiency peak. Plus, you will reduce your CO2 emissions per operation by approximately 20%. Thriving in high feeds ISO application areas P M K N S H
With the universal -M5 geometry, CoroDrill® DE10 offers seamless plug- and-play functionality and uncompromised performance across a wide range of cutting data. In addition, no pilot drill is needed, which means less stock inventory and reduced cycle time. Redefining plug-and-play
Features and Benefits
• High-feed capabilities allow for higher penetration rate, increasing productivity and reducing cost per hole. • Patented pre-tension clamping interface and strong drill tip geometry enable secure and robust drilling. • Interface design offers good centering capabilities leading to straighter holes and tighter tolerance. • One geometry for all materials and no pilot drill needed means less stock inventory. • Easy plug-and-play with recommended cutting data. • Optimized chip flute geometry with two twisted coolant holes for good chip evacuation and hole quality.
>> SHOP NOW
Powered by FlippingBook