Precision Instruments Spring Edition April 1st - June 30th
1-800--923-6255 www.dgisupply.ca
Valid until Aug 31st, 2025
CoroDrill® D S20 Innovative drill body and insert designs have resulted in a drilling concept with never-before-seen stiffness, evacuation performance and light cutting action. CoroDrill® DS20 reaches hole depths from 4 up to 7 × DC and offers reliability, predictability and outstanding penetration rates. Improve your drilling operations even more and reduce your tool inventory by using the stable and high precision Modular Drilling Interface, MDI.
The design of the CoroDrill® DS20 has resulted in a strong and fatigue-resistant drill body where each drill body size is individually optimized to ensure a secure and consistent performance over the entire assortment. The drill body stiffness, in combination with light-cutting geometries, generates less vibration and significantly increased tool life. With high process security and good run-out accuracy, CoroDrill® DS20 will reduce your costs and increase your component quality. Strong drill body ISO application areas P M K N S H
Optimized insert design The robust insert seats have three support contact surfaces for less insert movements. The inserts are strong and have a bulk strength that provides extra toughness resulting in unmatched insert tool life. The ground peripheral insert allows for closer hole tolerance, predictability and consistent performance. Customer benefits
• Secure and reliable cutting process with high productivity ensuring low cost per hole. • Versatile drill with good chip formation in a broad cutting data range. • Large selection of geometries, from versatile to optimized offer.
• Optimized chip control and chip evacuation. • Consistent and predictable hole diameter. • Light cutting with low cutting forces. • Reduced sound level.
>> SHOP NOW
1-800--923-6255 www.dgisupply.ca
Valid until Aug 31st, 2025
CoroDrill® DE10 CoroDrill® DE10, the new best-performing exchangeable-tip drill mastering productive short-hole drilling in all materials. CoroDrill® DE10 is designed for short-hole drilling between diameters 9.00–17.90 mm (0.354–0.705 inch) across all material groups, offering a large cutting data window with high cutting parameters right from the start. The concept includes cylindrical and cylindrical with flat shank types and presents the unique benefit of a single, versatile geometry that covers all materials.
The peak performance of CoroDrill® DE10 is achieved at high feeds and speeds, leveraging its unique geometry, high-performance grades and robust pre-tension clamping interface. Increase your feed by 40% and watch your productivity soar and cost efficiency peak. Plus, you will reduce your CO2 emissions per operation by approximately 20%. Thriving in high feeds ISO application areas P M K N S H
With the universal -M5 geometry, CoroDrill® DE10 offers seamless plug- and-play functionality and uncompromised performance across a wide range of cutting data. In addition, no pilot drill is needed, which means less stock inventory and reduced cycle time. Redefining plug-and-play
Features and Benefits
• High-feed capabilities allow for higher penetration rate, increasing productivity and reducing cost per hole. • Patented pre-tension clamping interface and strong drill tip geometry enable secure and robust drilling. • Interface design offers good centering capabilities leading to straighter holes and tighter tolerance. • One geometry for all materials and no pilot drill needed means less stock inventory. • Easy plug-and-play with recommended cutting data. • Optimized chip flute geometry with two twisted coolant holes for good chip evacuation and hole quality.
>> SHOP NOW
1-800--923-6255 www.dgisupply.ca
Valid until Aug 31st, 2025
Features and Benefits • Geometry designed to gain excellent machining stability and process security • Maximum productivity thanks to the new grade X2BM • Fully-coated drills ensure high wear resistance • Robust design ensures good centering and hole straightness securing best possible pre-hole conditions for subsequent operations like tapping or reaming • Reduced cost per hole and significantly improved tool life Application For versatile, secure hole making, CoroDrill® Dura 462 is the short-hole drill you can trust. Engineered for high process security and extended tool life, it delivers reliable performance across materials. A wide assortment ensures you have the right tool for every job—drilling with confidence and efficiency while keeping costs low. CoroDrill® Dura 462 Made for durable drilling
ISO application areas
P M K N
S H O
When you use CoroDrill® Dura 462 with cutting data from CoroPlus® Tool Guide, you can expect a 100% tool life increase or more * . Our Zertivo® 2.0 PVD coating and micro-grained cemented carbide substrate are the true enablers, building resistance to high feeds and speeds. The result? Reliable productivity and reduced cost per hole. *Recorded against competitors in benchmarking tests.
• Standard diameter range 3.00–20.00 mm (0.118–0.787 inch) with H8-H9 hole tolerance; • Micro drills diameter range 0.030–3.00 mm (0.001–0.118 inch) (+/-6microns) with JS7 hole tolerance • Drill depth up to 8×DC; micro drills 6×DC • Typical components: Flanges, castings, sieves, hubs, valve bodies, pump bodies
>> SHOP NOW
Page 1 Page 2 Page 3Powered by FlippingBook