VX Taps For Hardened Materials up to 65HRC
List 341 EXOCARB® VX-OT, JIS
PACKED 1 PIECE
CARBIDE
STRAIGHT FLUTE
V
0˚
C/3P
Lc
L1
lk
L
Overall Length
Thread Length
Neck Length
Shank Diameter
Square Width
Square Length
Number of Flutes
Thread Size
Thread Limit
EDP
Lc (mm)
L1 (mm)
d (mm) 3.00 4.00 5.00 5.50 6.00 6.20 6.20 7.00 7.00 7.00 8.50 8.50 8.50 8.50
k (mm) 2.50 3.20 4.00 4.50 4.50 5.00 5.00 5.50 5.50 5.50 6.50 6.50 6.50 6.50 8.00 8.00
lk (mm) 5.00 6.00 7.00 7.00 7.00 8.00 8.00 8.00 8.00 8.00 9.00 9.00 9.00 9.00
L (mm)
8330049 8330055 8330061 8330067 8330073 8330087 8330085 8330101 8330099 8330097 8330121 8330119 8330117 8330115 8330125 8330123 8330133 8330131 8330141 8330139 8330149 8330147
M2.6 x 0.45
OH3 OH3 OH3 OH3 OH3 OH3 OH3 OH3 OH3 OH3 OH3 OH4 OH3 OH3 OH3 OH4 OH3 OH4 OH4 OH4 OH4 OH4
44.00 45.90 51.90 59.90 61.80 70.00 70.00 75.00 75.00 75.00 82.00 82.00 82.00 82.00 88.00 88.00 95.00 95.00
14.00 11.00 13.00 15.90 19.00 22.00 22.00 24.00 24.00 24.00 29.00 29.00 29.00 29.00 30.00 30.00 32.00 32.00 37.00 37.00 37.00 37.00
-
4 4 4 4 5 5 5 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6
M3 x 0.5 M4 x 0.7 M5 x 0.8
19.00 21.00 23.90 29.00
M6 x 1 M8 x 1
- - - - - - - - - - - - - - - - -
M8 x 1.25 M10 x 1 M10 x 1.25 M10 x 1.5 M12 x 1.25 M12 x 1.5 M12 x 1.75 M14 x 1.5 M12 x 1 M14 x 2 M16 x 1.5 M16 x 2 M18 x 1.5 M18 x 2.5 M20 x 1.5 M20 x 2.5
10.50 10.50 12.50 12.50 14.00 14.00 15.00 15.00
11.00 11.00 13.00 13.00 14.00 14.00 15.00 15.00
10.00 10.00 11.00 11.00 12.00 12.00
100.00 100.00 105.00 105.00
Globally Stocked
Stocked
Available Upon Request; MOQ May Apply
Tapping Guidelines 1. Set tapping speed between 3 ~ 10 SFM. 2. Choose largest hole-size possible, within the recommended tolerance range. 3. Use a non-water soluble cutting fluid.
4. Use highly rigid machine and tool holders. 5. Tapping by hand is NOT recommended. 6. For tapping length over 1.5D, step feed is recommended.
P
M
K
N
S
H
Steel
Non-Ferrous
HRSA
Carbon Steel
Stainless Steel
Hardened Steel
Alloy Steel 4140 4340
Cast Iron
Aluminum Nickel Alloy Titanium
Die Steel
Low Medium High 1010 1018 1035 1045 1065
6Al4V (30 HRC)
~35 HRC
35-45 HRC
45-50 HRC
50-70 HRC
6061 7075 Casting Inconel
300
400 17-4 PH
3-10 SFM 3-10 SFM
Good
Best
633
osgtool.com
Straight Fluted Taps
Powered by FlippingBook