Taps Tungsten Carbide Forming Taps
List 357 EXOCARB® OT-LT-NRT, JIS, Long Shank
PACKED 1 PIECE
FORMING CARBIDE BR
C/2P
Lc
lk
L1
L
Overall Length
Thread Length
Neck Length
Shank Diameter
Square Width
Square Length
Tap Drill Size
EDP Number
Thread Size
Thread Limit
L (mm)
Lc (mm)
L1 (mm)
d (mm) 6.00 6.20 7.00 7.00 8.50 8.50 8.50
k (mm) 4.50 5.00 5.50 5.50 6.50 6.50 6.50
lk (mm) 7.00 8.00 8.00 8.00 9.00 9.00 9.00
Min (mm) 5.49 7.36 9.36 9.24
Max (mm) 5.59 7.49 9.49 9.39
8315633 8315639 8315649 8315645 8315661 8315657 8315653
M6 x 1
RH7 RH7 RH7 RH7 RH8 RH7 RH8
100.00 19.00 150.00 22.00 150.00 24.00 150.00 24.00 150.00 29.00 150.00 29.00 150.00 29.00
29.00
M8 x 1.25 M10 x 1.25 M10 x 1.5 M12 x 1.25 M12 x 1.5 M12 x 1.75
- - - - - -
11.36 11.24 11.11
11.49 11.39 11.29
Stocked Globally Stocked Note: Other coatings are available upon request. See page 784 for tap drill recommendations. Available Upon Request; MOQ May Apply
HTE
P
M
K
N
S
H
Steel
Non-Ferrous
HRSA
Carbon Steel
Stainless Steel
Hardened Steel
Alloy Steel 4140 4340
Cast Iron
Aluminum Nickel Alloy Titanium
Die Steel
Low Medium High 1010 1018 1035 1045 1065
6Al4V (30 HRC)
~35 HRC
35-45 HRC
45-50 HRC
50-70 HRC
6061 7075 Casting Inconel
300
400 17-4 PH
65-150 SFM 50-120 SFM
Good
Best
439
osgtool.com
Forming Taps
Powered by FlippingBook