Diameter Correction Tool
List 15010 OSG DCT75
PACKED 1 PIECE
HSS
TiN
Thread Length
Shank Diameter
EDP Number
Thread Size
d (mm) 6.00 6.00
Lc (mm) 5.00 5.00 6.20 6.20 7.30 8.30 9.70 8.70
1501000105 1501000205
M3 x 0.5 M4 x 0.7 M6 x 1 M8 x 1
9342019 9342021 9342020 9342022 9342025 9342027
10.00 10.00 10.00 10.00 12.00 16.00
M8 x 1.25 M10 x 1.5 M12 x 1.75 M16 x 1.5
Stocked Globally Stocked Note: Since it is made to measure class 6H, it can also be used as is for 4H, 5H, JIS I and JIS II. If the internal thread is a blind hole, please confirm that the internal thread length is longer than the screw length of DCT75. The selection of the Height Master is required if the nominal diameter of the internal thread has a chamfer or counterbore over 1.5mm. Please consult with your local sales representative. Available Upon Request; MOQ May Apply
EXT
Sleeve and Height Master Selection Chart
Shank Diameter
Metric Sizes
Sleeve Hole Dia.
Height Master Dia.
6mm
M3 - M4
6.5mm
6mm
17.5mm (included with the Digimatic Indicator)
16mm
10mm - 16mm
M6 - M16
418
Diameter Correction Tool
osgtool.com
Powered by FlippingBook