Diameter Correction Tool
List 15015 OSG DCT75
PACKED 1 PIECE
HSS
TiN
Thread Length
Shank Diameter
EDP Number
Thread Size
d (mm) 6.00 6.00 6.00 6.00
Lc (mm) 5.00 5.00 5.90 5.00 7.00 5.00 5.00 7.80 7.00 8.80
1501500105 1501500205 1501500305 1501500405
No. 5 - 44 UNF No. 6 - 32 UNC No. 10 - 24 UNC No. 10 - 32 UNF 1/4 - 20 UNC 1/4 - 28 UNF 1/4 - 32 UNEF 5/16 - 18 UNC 5/16 - 24 UNF 3/8 - 16 UNC 3/8 - 24 UNF 7/16 - 14 UNC 7/16 - 20 UNF 1/2 - 13 UNC 1/2 - 20 UNF 1/2 - 32 UN 9/16 - 18 UNF 5/8 - 11 UNC 5/8 - 18 UNF 3/4 - 10 UNC 3/4 - 16 UNF 7/8 - 9 UNC 7/8 - 14 UNF 1 - 8 UNC 1 - 12 UNF
9342028 9342029 9342030 9342031 9342033 9342034 9342035 9342036 9342037 9342038
10.00 10.00 10.00 10.00 10.00 10.00 10.00 12.00 12.00 13.00 13.00 13.00 15.00 16.00 16.00 20.00 20.00 23.00 23.00 25.50 25.50
1501500505
7.00 10.00 7.00 10.80
7.00 5.00 7.80
1501500605 1501500705 1501500805 1501500905 1501501005 1501501105 1501501205 1501501305 1501501405 1501501505
12.70 7.80 14.00 8.80 15.60 10.00 17.50 11.70
Stocked Globally Stocked Note: Since it is made to measure class 2B, it can also be used as is for 3B. If the internal thread is a blind hole, please confirm that the internal thread length is longer than the screw length of DCT75. The selection of the Height Master is required if the nominal diameter of the internal thread has a chamfer or counterbore over 1.5mm. Please consult with your local sales representative. Available Upon Request; MOQ May Apply
EXT
Sleeve and Height Master Selection Chart
Shank Diameter
Inch Sizes
Sleeve Hole Dia.
Height Master Dia.
6mm
6mm
No. 5 - No.10
6.5mm
17.5mm (included with the Digimatic Indicator)
10mm - 16mm
1/4" - 5/8"
16mm
20mm - 25.5mm
3/4" - 1
26.5mm
417
osgtool.com
Diameter Correction Tool
Powered by FlippingBook