PZAG
Counterboring Cutter
List 52510 & 78321 - PHOENIX® PZAG List 52511 & 78421 - PHOENIX® PZAG Bore
Feed Rate f (in/rev)
Tensile Strength – Hardness
Work Material
Drilling Speed Vc (SFM)
Ø0.531-0.625 (14-17.5mm) 0.0055 (0.003-0.008) 0.0055 (0.003-0.008) 0.005 (0.003-0.006) 0.004 (0.003-0.006) 0.006 (0.003-0.010) 0.0055 (0.003-0.008) 0.006 (0.003-0.010) 0.003 (0.002-0.0055) 0.003 (0.002-0.0055) 0.003 (0.002-0.0055) 0.003 (0.002-0.0055) 0.003 (0.002-0.0055)
Ø0.719-0.906 (20-23mm) 0.007 (0.004-0.010) 0.007 (0.004-0.010) 0.0055 (0.004-0.008) 0.005 (0.004-0.008) 0.008 (0.004-0.012) 0.007 (0.004-0.010) 0.008 (0.004-0.012) 0.003 (0.0024-0.0055) 0.004 (0.0024-0.006) 0.004 (0.0024-0.006) 0.003 (0.0024-0.0055) 0.003 (0.002-0.0055)
Ø1.000-1.813 (26-48mm)
Ø2.000-2.750 (54-72mm)
Ø3.000-0.313 (76-82mm)
0.008 (0.005-0.012) 0.008 (0.005-0.012) 0.007 (0.005-0.010) 0.006 (0.005-0.010) 0.012 (0.006-0.016) 0.008 (0.006-0.012) 0.012 (0.006-0.016) 0.005 (0.003-0.008) 0.0055 (0.003-0.008) 0.0055 (0.003-0.008) 0.005 (0.003-0.008) 0.005 (0.003-0.008)
0.016 (0.008-0.024) 0.016 (0.008-0.024) 0.016 (0.008-0.020) 0.014 (0.008-0.020) 0.024 (0.012-0.032) 0.016 (0.012-0.032) 0.024 (0.012-0.031) 0.010 (0.006-0.016) 0.012 (0.006-0.020) 0.012 (0.006-0.020) 0.010 (0.006-0.016) 0.010 (0.006-0.016)
0.016 (0.008-0.024) 0.016 (0.008-0.024) 0.016 (0.008-0.020) 0.014 (0.008-0.020) 0.024 (0.012-0.032) 0.016 (0.012-0.032) 0.024 (0.012-0.031) 0.010 (0.006-0.016) 0.012 (0.006-0.020) 0.012 (0.006-0.020) 0.010 (0.006-0.016) 0.010 (0.006-0.016)
Mild Steels, Carbon Steels (1010, 1018) Carbon Steels, Alloy Steels (1050, 4140)
~180 HB 525
(330 - 655)
~280 HB 495
P
(330 - 655)
Die Steels (H13, D2)
~280 HB 395
(265 - 590)
Stainless Steels (304, 420)
~250 HB 425
M
(265 - 590)
Cast Iron (No. 35 B)
~350 N/mm² 655
(495 - 915)
K
Ductile Cast Iron (60-40-18) Aluminum Alloys (6061, 7075)
~800 N/mm² 525
(330 - 720)
~13% Si
650
N
(330 - 2625)
Heat Resistant Alloys (Inconel 718)
-
165
(100 - 200)
S
Titanium Alloy (Ti-6Al-4V)
-
200
(100 - 330)
Pre-hardened Steel (P20, Stavax) Die Cast Steels (A2, S7) Hardened Steels (D2)
40 - 43 HrC 330
(200 - 400)
43 - 48 HrC 260
H
(165 - 330)
50 - 55 HrC 200 (130 - 260)
370
Drilling Technical
osgtool.com
Powered by FlippingBook