MAX-MINI High Performance Micro Carbide Drills
List 5315 - EXOCARB® MAX-MINI UVM-LDS List 5320 - EXOCARB® MAX-MINI UVM-DRL: 5D List 5325 - EXOCARB® MAX-MINI UVM-DRL: 10D
Work Material Drilling Speed Drill Dia.
Stainless Steels 300SS, 400SS, 17-4PH
Special Alloy Steels, Hardened Steels
Aluminum Alloys, Cast Aluminum
2-20 SFM
2-20 SFM
2-30 SFM
Speed RPM 25,000 25,000 25,000 21,350 17,790 15,250 13,340 11,860 10,670
Feed IPR
Pecking (In)
Speed RPM 25,000 25,000 25,000 25,000 25,000 22,180 19,400 17,250 15,520
Feed IPR
Pecking (In)
Speed RPM 25,000 25,000 25,000 21,350 17,790 15,250 13,340 11,860 10,670
Feed IPR
Pecking (In)
mm 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.10
0.00004 - 0.00006 0.00008 0.00004 - 0.00006 0.00012 0.00004 - 0.00006 0.00016 0.00004 - 0.00006 0.00020 0.00004 - 0.00006 0.00024 0.00004 - 0.00006 0.00027 0.00004 - 0.00006 0.00031 0.00004 - 0.00006 0.00035 0.00004 - 0.00006 0.00040
0.00004 - 0.00006 0.00008 0.00004 - 0.00006 0.00012 0.00004 - 0.00006 0.00016 0.00004 - 0.00006 0.00020 0.00004 - 0.00006 0.00024 0.00004 - 0.00006 0.00027 0.00004 - 0.00006 0.00031 0.00004 - 0.00006 0.00035 0.00004 - 0.00006 0.00040
0.0002 - 0.0004 0.00008 0.0002 - 0.0004 0.00012 0.0002 - 0.0004 0.00016 0.0002 - 0.0004 0.00020 0.0002 - 0.0004 0.00024 0.0002 - 0.0004 0.00027 0.0002 - 0.0004 0.00031 0.0002 - 0.0004 0.00035 0.0002 - 0.0004 0.00040
High Heat Material
Work Material
Ti-Alloy
Inconel, Waspaloy
Drilling Speed
2-7 SFM
2-5 SFM
Drill Dia. Speed RPM
Speed RPM
Feed IPR
Pecking (In)
Feed IPR
Pecking (In)
mm 0.02 21,830 0.000012 - 0.000028 0.00008 15,650 0.000012 - 0.000028 0.00008 0.03 14,550 0.000012 - 0.000028 0.00012 10,430 0.000012 - 0.000028 0.00012 0.04 10,910 0.000012 - 0.000028 0.00016 7,820 0.000012 - 0.000028 0.00016 0.05 8,730 0.000012 - 0.000028 0.00020 6,260 0.000012 - 0.000028 0.00020 0.06 7,280 0.000012 - 0.000028 0.00024 5,210 0.000012 - 0.000028 0.00024 0.07 6,240 0.000012 - 0.000028 0.00027 4,470 0.000012 - 0.000028 0.00027 0.08 5,460 0.000012 - 0.000028 0.00031 3,910 0.000012 - 0.000028 0.00031 0.09 4,850 0.000012 - 0.000028 0.00035 3,480 0.000012 - 0.000028 0.00035 0.10 4,370 0.000012 - 0.000028 0.00040 3,130 0.000012 - 0.000028 0.00040 1. Please use in a machine with precise spindle rotation. Tight clamping is critical.
2. The indicated feeds and speeds are for drilling with water-soluble fluid. 3. Please use water-soluble high density fluid (less than 20 times dilution). 4. Please utilize pecking cycle as specified in table.
5. The run out with a drill in the spindle should be less than 0.0001”. 6. OSG’s Shrink Fit System is the recommended tool holder for these drills. For machines that cannot achieve the speeds indicated in the above table, please set rotation as high as possible. Tool life may be decreased.
331
osgtool.com
Drilling Technical
Powered by FlippingBook