HY-PRO ® SHRINK Shrink Fit System
Do-It-Yourself Extensions If necessary, the shape of the shrink extension can be easily modified. This design provides the best holder shape for operations that have major interference with work materials.
1. The shape of the flush collet cannot be adjusted. 2. Other adjustments should be based on the ranges described below. (Wall thickness should be at least 1.5mm) 3. DO NOT change the overall length. 4. For details, please refer to the instruction manual attached to the product package.
Recommended Cutting Conditions for Extension Modification
1. The cutting depth should be kept small. 2. Use water soluble coolant. 3. Use positive-rake inserts for stainless steel.
3.5
Applicable Range for Do-It-Yourself Extension
1.5
Cutting Speed (m/min)
Cutting Speed (m/min)
Feed (mm/rev)
Cutting Depth (min)
1.5
Roughing
30 - 50
0.1
0.2
Finishing
30 - 50
0.05
0.1
1587
osgtool.com
HY-PRO® Shrink
Powered by FlippingBook