HY-PRO ® SHRINK Shrink Fit System For Small Shank Diameter use h6 Shanks
The HY-PRO Shrink System can be used for tools with a minimum shank diameter of 1/8” or 3mm. For tools with a shank diameter of Ø1/4-1/2” or Ø6-12mm, the system requires at least an h7 shank tolerance; for tools with a shank diameter of Ø1/8-3/16” or Ø3-5mm, use an h6 shank tolerance. A wide variety of tools are applicable.
Ø1/8 - 1/2" Ø3 - 12mm
Various Coolant Supply Devices
Through the Tool Suitable when using a tool with internal coolant to supply the point of the cutting edge. This is especially effective for drilling because the coolant is guaranteed to reach the cutting area.
Through the Holder Supplies coolant from the front face of the holder. This is used for tools without internal coolant supply and regular or slim type extensions.
Through the Collet Supplies coolant from the front face of the shrink extensions. Although the diameter of the collet end face increases, coolant supply becomes even more effective.
1586
HY-PRO® Shrink
osgtool.com
Powered by FlippingBook