ToolingSolutionsProductCatalogVol1 2024 USA LR

HY-PRO ® SHRINK Shrink Fit System

List 9909 HY-PRO® Shrink Straight Slim Extensions, For Standard Milling/End Mill Chucks

PACKED 1 PIECE

1.5~ 4mm

Max Insertion Length

Bore Diameter

Nose Diameter

Shank Length

Neck Diameter

Overall Length

Shank Diameter

Clamping Length

Neck Length

EDP Number

Body Type

Designation

C (Inch)

l2 (Inch)

L1 (Inch)

L2 (Inch)

L3 (Inch) 1.400 1.400

d1 (Inch)

L (Inch)

d (Inch)

H (Inch)

H1 (Inch)

d3 (Inch)

9910120 9910123 9910137

ST9.525-SLS1/8-80 Slim 0.125 0.240 1.750 - ST9.525-SLS3/16-80 Slim 0.188 0.306 1.750 - ST12.7-SLS1/4-80 Slim 0.250 0.368 1.750 -

- - -

3.150 0.375 0.390 2.720 3.150 0.375 0.590 2.720

1.400 3.150 0.500 0.710 2.720 9910121 ST15.875-SLS1/8-110 Slim 0.125 0.240 2.190 1.630 0.374 2.140 0.410 4.330 0.625 0.390 3.660 9910124 ST15.875-SLS3/16-110 Slim 0.188 0.306 2.190 1.630 0.374 2.140 0.480 4.330 0.625 0.590 3.660 9910122 ST19.05-SLS1/8-205 Slim 0.125 0.240 3.610 3.950 0.374 4.460 0.660 8.070 0.750 0.390 7.400 9910125 ST19.05-SLS3/16-205 Slim 0.188 0.306 3.610 - - 4.460 - 8.070 0.750 0.590 7.400 9910138 ST19.05-SLS1/4-110 Slim 0.250 0.368 2.950 0.870 0.374 1.380 0.460 4.330 0.750 0.710 3.660 9910143 ST19.05-SLS5/16-110 Slim 0.313 0.430 2.950 0.870 0.374 1.380 0.520 4.330 0.750 0.980 3.660 9910148 ST19.05-SLS3/8-110 Slim 0.375 0.490 2.950 0.870 0.374 1.380 0.580 4.330 0.750 1.180 2.360 9910140 ST25.4-SLS1/4-9 Slim 0.250 0.370 4.700 3.820 0.510 4.330 1.000 9.000 1.000 0.710 8.340 9910145 ST25.4-SLS5/16-9 Slim 0.313 0.430 4.700 3.820 0.510 4.330 1.000 9.000 1.000 0.980 8.340 9910150 ST25.4-SLS3/8-155 Slim 0.375 0.490 3.600 1.990 0.374 2.500 0.700 6.100 1.000 1.180 2.360 9910152 ST25.4-SLS3/8-9 Slim 0.375 0.490 4.700 3.820 0.510 4.330 1.000 9.000 1.000 1.180 2.360 9910157 ST25.4-SLS1/2-155 Slim 0.500 0.620 4.100 1.490 0.374 2.000 0.770 6.100 1.000 1.180 2.360 9910159 ST25.4-SLS1/2-9 Slim 0.500 0.620 4.700 3.820 0.510 4.330 1.000 9.000 1.000 1.180 2.360 Stocked Available Upon Request; MOQ May Apply Globally Stocked The tool should be inserted deeper than the safety mark. Do not exceed Max Insertion Length.

1581

osgtool.com

HY-PRO® Shrink