PFAL
Finishing Cutter for Aluminum
Adjusting Cutting Edge Height
Names of Components:
Blade (Normal / Wiper)
Wrench for Blade A
Wrench for Wedge B
Blade Clamping Screw
Wedge
Wedge Clamping Screw
1. Confirm Wedge Position Check and ensure that all wedges are in the correct position. Make adjustments when necessary.
2. Mounting of Blades Mount one wiper blade (FR1204-W) to the wiper blade position indicator and the normal blades (FR1204 or FR1206) to the remaining positions. Using the T-Wrench (A), tighten the clamp screw completely to 10 Nm.
Wiper Blade Position Indicator
A
Correct
Incorrect
3. Measurement of Cutting Edge Height Measure all of the cutting edge heights and determine the highest normal cutting edge.
4. Adjustment of Normal Blades Adjust all other normal cutting edges to match the highest normal cutting edge height. The offset should be within 0.005mm. To lift the wedges, use the L-Wrench (B) to turn the wedge screw clockwise.
Cutting Edge Height
Cutting Edge Height
Highest Normal Cutting Edge
B
Normal Blade
Wiper Blade
Normal Blade
Wiper Blade
osgtool.com
1540
End Mill Technical
Powered by FlippingBook