PMD Multi-Function Cutter
List 53400 - PHOENIX® PMD: SA (Continued) List 78234 - PHOENIX® PMD: SS (Continued) List 52606 - PHOENIX® PMD: ASF (Continued) List 78334 - PHOENIX® PMD: SF (Continued)
Counterboring & Plunging
Feed Rate f (in/rev)
Cutting Speed Vc (SFM)
Tensile Strength - Hardness
Work Material
Ø0.750
Ø1.000
Ø1.250
Mild Steels, Carbon Steels (1010, 1018) Carbon Steels, Alloy Steels (1050, 4140)
525 (330 - 655) 495 (330 - 655) 395 (265 - 590) 425 (265 - 590) 525 (330 - 855) 525 (330 - 720) 655 (330 - 2625) 165 (100 - 200) 195 (100 - 330) 330 (195 - 395) 265 (130 - 330) 195 (130 - 265)
0.0027 (0.002 - 0.003) 0.0027 (0.002 - 0.003) 0.0027 (0.002 - 0.003) 0.0027 (0.002 - 0.003) 0.0027 (0.002 - 0.003) 0.0027 (0.002 - 0.003) 0.0027 (0.002 - 0.003) 0.0027 (0.002 - 0.003) 0.0027 (0.002 - 0.003) 0.0027 (0.002 - 0.003) 0.0027 (0.002 - 0.003) 0.0027 (0.002 - 0.003)
0.003 (0.002 - 0.004) 0.003 (0.002 - 0.004) 0.003 (0.002 - 0.004) 0.003 (0.002 - 0.004) 0.003 (0.002 - 0.004) 0.003 (0.002 - 0.004) 0.003 (0.002 - 0.004) 0.003 (0.002 - 0.004) 0.003 (0.002 - 0.004) 0.003 (0.002 - 0.004) 0.003 (0.002 - 0.004) 0.003 (0.002 - 0.004)
0.004 (0.003 - 0.005) 0.004 (0.003 - 0.005) 0.004 (0.003 - 0.005) 0.004 (0.003 - 0.005) 0.004 (0.003 - 0.005) 0.004 (0.003 - 0.005) 0.004 (0.003 - 0.005) 0.004 (0.003 - 0.005) 0.004 (0.003 - 0.005) 0.004 (0.003 - 0.005) 0.004 (0.003 - 0.005)
~180 HB
P
~280 HB
Die Steels (D2, H13)
~280 HB
Stainless Steels (304, 420)
M
~250 HB
Cast Iron (FC250)
~350 N/mm²
K
Ductile Cast Iron (60-40-18) Aluminum Alloys (6061, 7075)
~800 N/mm²
N
~13% Si
Heat Resistant Alloys (Inconel 718)
-
S
Titanium Alloy (Ti-6Al-4V)
-
Pre-hardened Steel (P20, Stavax) Die Cast Steels (A2, S7) Hardened Steels (D2)
40 - 43 HrC
H
43 - 48 HrC
50 - 55 HrC 0.004 (0.003 - 0.005) 1. Above recommended Cutting Speed is for short shank type; for long shank type, use 80% of the Cutting Speed shown in the above table.
3˚
Maximum Processing Angle During Ramping and Helical Drilling Operations <3 °
DC
D 0 Max.
Helical Drilling
Ramping
Maximum Helical Milling Diameter (Inch)
Maximum Helical Milling Diameter (mm)
Diameter (Inch)
Diameter (mm)
3˚
Dc
D₀ Max
Dc 20 25 32
D₀ Max
3˚
0.750 1.000 1.250
1.381 1.881 2.381
37 47 61
DC
DC
D 0 Max.
3˚
DC
osgtool.com
1533
End Mill Technical
Powered by FlippingBook