PSTW
90 ˚ Indexable Shoulder Cutter for Face Milling
List 53100 - PHOENIX® PSTW: Bore List 78131 - PHOENIX® PSTW: Bore
Insert Size TNKU12… Face Milling
Work Material
Tensile Strength – Hardness
Milling Speed Vc (SFM)
Feed Per Tooth fz (in/t)
Depth of Cut Aa (in)
Mild Steels, Carbon Steels (1010, 1018) Carbon Steels, Alloy Steels (1050, 4140)
0.006 (.002 - .010) 0.006 (.002 - .010) 0.005 (.002 - .008) 0.004 (.002 - .007) 0.004 (.002 - .007) 0.008 (.004 - .012) 0.006 (.002 - .010) 0.006 (.004 - .012) 0.003 (.002 - .006) 0.003 (.002 - .006) 0.004 (.003 - .008) 0.003 (.002 - .006) 0.002 (.002 - .004)
590 (330 - 820) 590 (330 - 820) 495 (260 - 655) 495 (260 - 655) 260 (195 - 395) 650 (330 - 1150) 590 (330 - 885) 985 (655 - 4920) 115 (85 - 195) 130 (100 - 395) 330 (165 - 495) 265 (130 - 395) 195 (130 - 295)
~180 HB
0.120
P
~280 HB
0.120
Die Steels (H13, D2)
~280 HB
0.120
Stainless Steels (Dry) (304SS, 420SS) Stainless Steels (Wet) (304SS, 420SS)
~250 HB
0.080
M
~250 HB
0.080
Cast Iron (FC250)
~350 N/mm²
0.120
K
Ductile Cast Iron (60-40-18) Aluminum Alloys (6061, 7075)
~800 N/mm²
0.120
N
~13% Si
0.120
Heat Resistant Alloys (Inconel 718)
-
0.040
S
Titanium Alloy (Ti-6Al-4V)
-
0.060
Pre-hardened Steel (P20, Stavax) Die Cast Steels (A2, S7) Hardened Steels (D2)
40 - 43 HrC
0.060
H
43 - 48 HrC
0.040
50 - 55 HrC
0.020
osgtool.com
1531
End Mill Technical
Powered by FlippingBook