PAO
45° Face Milling Cutter
List 52800 - PHOENIX® PAO: Bore List 78120 - PHOENIX® PAO: Bore
Insert Size OZKU06… / XAHT06… Face Milling
Work Material
Tensile Strength – Hardness
Milling Speed Vc (SFM)
Feed Per Tooth fz (in/t)
Depth of Cut Aa (in)
Mild Steels, Carbon Steels (1010, 1018) Carbon Steels, Alloy Steels (1050, 4140)
0.010 (0.008 - 0.020) 0.010 (0.008 - 0.020) 0.010 (0.006 - 0.016) 0.008 (0.006 - 0.016) 0.012 (0.008 - 0.020) 0.011 (0.006 - 0.016) 0.005 (0.002 - 0.008) 0.006 (0.004 - 0.010) 0.006 (0.004 - 0.010) 0.005 (0.002 - 0.008) 0.004 (0.002 - 0.008)
590 (330 - 820) 590 (330 - 820) 495 (260 - 655) 395 (260 - 590) 655 (330 - 1150) 590 (330 - 885)
~180 HB
0.080
~280 HB
0.080
P
Die Steels (H13, D2)
~280 HB
0.080
Stainless Steels (304, 420)
~250 HB
0.080
M
Cast Iron (No. 35 B)
~300 N/mm²
0.080
K
Ductile Cast Iron (60-40-18)
~600 N/mm²
0.080
Heat Resistant Alloys (718 Inconel)
-
115
0.040
(85 - 200)
S
-
130 (100 - 400)
0.060
Titanium Alloy (Ti-6Al-4V)
Pre-hardened Steel (P20, Stavax) Die Cast Steels (A2, S7) Hardened Steels (D2)
330 (195 - 495) 260 (130 - 395) 195 (130 - 295)
40 - 43 HRC
0.060
43 - 48 HRC
0.020
H
50 - 55 HRC
0.020
osgtool.com
1526
End Mill Technical
Powered by FlippingBook