PAS 45° Face Milling Cutter
List 52700 - PHOENIX® PAS: Bore List 78020 - PHOENIX® PAS: Bore
Insert Size SNKU15… Face Milling
Work Material
Tensile Strength – Hardness
Milling Speed Vc (SFM)
Feed Per Tooth fz (in/t)
Depth of Cut Aa (in)
Mild Steels, Carbon Steels (1010, 1018) Carbon Steels, Alloy Steels (1050, 4140)
0.007 (0.006 - 0.014) 0.007 (0.006 - 0.014) 0.006 (0.004 - 0.012) 0.005 (0.003 - 0.010) 0.008 (0.006 - 0.014) 0.008 (0.004 - 0.012) 0.004 (0.002 - 0.006) 0.005 (0.003 - 0.008) 0.005 (0.003 - 0.008) 0.004 (0.002 - 0.006) 0.003 (0.002 - 0.006)
590 (330 - 820) 590 (330 - 820) 495 (260 - 655) 395 (260 - 590) 590 (330 - 1150) 590 (330 - 885) 115 (85 - 200) 130 (100 - 400) 330 (195 - 495) 260 (130 - 395) 195 (130 - 295)
~180 HB
0.120
~280 HB
0.120
P
Die Steels (H13, D2)
~280 HB
0.120
Stainless Steels (304, 420)
~250 HB
0.120
M
Cast Iron (No. 35 B)
~300 N/mm²
0.160
K
Ductile Cast Iron (60-40-18)
~600 N/mm²
0.120
Heat Resistant Alloys (Inconel 718)
–
0.040
S
Titanium Alloy (Ti-6Al-4V) Pre-hardened Steel (P20, Stavax) Die Cast Steels (A2, S7) Hardened Steels (D2)
–
0.060
40 - 43 HRC
0.060
43 - 48 HRC
0.020
H
50 - 55 HRC
0.020
osgtool.com
1525
End Mill Technical
Powered by FlippingBook