AERO Diamond Coated Routers for Milling CFRP and Other Composites
List 2650: MFR, Finishing Router
Side Milling
Work Material
Carbon & Glass Fiber Reinforced Plastics
Cutting Speed
325-600 SFM
a a<1.0D a r ≤ 0.2D
Depth of Cut
Drill Diameter (Inch)
Speed RPM
Feed IPR
1/4 3/8 1/2
5,000 - 9,000 3,300 - 6,000 2,500 - 4,000
0.009 - 0.016 0.019 - 0.047 0.028 - 0.055
1. The conditions listed above are based on approximately 1xDc thickness of part with rigid work holding. 2. Conventional cut is recommended at part side for good surface finish.
3. Milling speed can be increased by 20-50% with the use of appropriate cutting oil. 4. Please provide appropriate measures against dust (Such as vacuum dust collection). 5. Depending on the workpiece thickness and form as well as work holding, vibration may occur. When it occurs, please adjust RPM and feed rate.
Feed Reduction
Material Thickness
Feed Reduction
≤0.25D
x80%
0.25D ~ 0.5D
x150%
0.5D ~ 1D
x120%
1D ~ 2D
x80%
2D ~ 3D
x50%
osgtool.com
1509
End Mill Technical
Powered by FlippingBook