ToolingSolutionsProductCatalogVol1 2024 USA LR

AM-EBT End Mills Designed for Additive Manufacturing

List 4730 & 4630: 3-Flute, Stub Length, Ball End

Hardness

-

-

-

-

45 HRC

65 HRC

70 HRC

Cobalt- Chromium Alloy (Stellite)

Work Material

Ni-Based Alloy (Inconel 718)

Stainless Steel

Titanium Alloy

Hardened Steel

SFM

195-260

165-230

135-190

70-130

165-230

135-190

70-130

a a

a r

Dia R≤6 R>6

Depth of Cut

≤0.15D ≤3mm

0.05D

Non- Tapered Neck Length

Feed (in/min)

Speed (RPM)

Feed (in/min)

Speed (RPM)

Feed (in/min)

Speed (RPM)

Feed (in/min)

Speed (RPM)

Feed (in/min)

Speed (RPM)

Feed (in/min)

Speed (RPM)

Feed (in/min)

Speed (RPM)

Mill Dia.

4 11100 43.3 9500 37.0 8000 31.1 4800 18.9 9500 37.0 8000 31.1 4800 18.9 8 5600 19.7 4800 16.9 4300 15.4 2600 9.1 4800 16.9 4300 15.4 2600 9.1

-

2

3/32 - 3/16 9371 36.6 8020 31.2 6754 26.3 4052 16.0 8020 31.2 6754 26.3 4052 16.0 3/8 4728 16.6 4052 14.3 3630 13.0 2195 7.7 4052 14.3 3630 13.0 2195 7.7 - 3 6 7400 43.3 6400 37.8 5300 31.5 3200 18.9 6400 37.8 5300 31.5 3200 18.9 12 4400 23.2 3800 20.1 3300 17.7 2000 10.6 3800 20.1 3300 17.7 2000 10.6 1/8 - 1/4 7028 41.1 6078 35.9 5034 29.9 3039 17.9 6078 35.9 5034 29.9 3039 17.9 1/2 4179 22.0 3609 19.1 3134 16.8 1899 10.1 3609 19.1 3134 16.8 1899 10.1 - 4 8 5600 42.5 4800 36.6 4000 30.3 2400 18.5 4800 36.6 4000 30.3 2400 18.5 16 3400 22.4 2900 19.3 2500 16.5 1500 9.8 2900 19.3 2500 16.5 1500 9.8 3/16 - 3/8 4685 35.6 3956 30.2 3332 25.2 1978 15.2 3956 30.2 3332 25.2 1978 15.2 3/4 2844 18.7 2438 16.2 2032 13.4 1219 8.0 2438 16.2 2032 13.4 1219 8.0 - 5 10 4500 42.5 3800 35.8 3200 30.3 1900 18.1 3800 35.8 3200 30.3 1900 18.1 20 2800 23.6 2400 20.5 2000 16.9 1200 11.0 2400 21.7 2000 16.9 1200 11.0 - 6 - 3700 44.1 3200 37.8 2700 31.5 1600 18.9 3200 37.8 2700 31.5 1600 18.9 1/4 - - 3514 41.9 3012 35.6 2510 29.3 1506 17.8 3012 35.6 2510 29.3 1506 17.8 5/16 - - 2811 39.6 2431 34.3 2051 29.0 1216 17.1 2431 34.3 2051 29.0 1216 17.1 - 8 - 2800 39.4 2400 33.9 2000 28.3 1200 16.9 2400 33.9 2000 28.3 1200 16.9 - 10 - 2200 39.4 1900 33.9 1600 28.3 960 16.9 1900 33.9 1600 28.3 960 16.9 - 12 - 1900 44.1 1600 37.8 1300 31.5 800 18.9 1600 37.8 1300 31.5 800 18.9 9/16 - - 1562 36.3 1325 31.3 1089 26.4 663 15.7 1325 31.3 1089 26.4 663 15.7 - 16 - 1400 36.2 1200 31.1 1000 26.0 600 15.4 1200 31.1 1000 26.0 600 15.4 3/4 - - 1171 30.3 1030 26.7 843 21.9 506 13.0 1030 26.7 843 21.9 506 13.0 - 20 - 1100 33.1 1000 28.3 800 23.6 480 14.2 1000 28.3 800 23.6 480 14.2 1. This tool is recommended for the roughing of additive manufacturing and mold overlay surfaces. 2. Please use machines and holders that are rigid and highly accurate. 3. The values listed above are for reference. Please set the cutting condition in accordance with the actual machining environment. 4.Please reduce the feed rate when the depth of cut is greater than specified. 5. Please adjust the speed, feed and depth of cut accordingly when the overhang length is longer than specified. 6. Please use a suitable fluid with high smoke retardant properties.

7. During dry (no fluid) milling, please use air blow to remove disposable chips from the milling area and to eliminate chip packing. 8. Please use water-soluble coolant when machining stainless steel, cobalt-chromium based alloy, titanium alloy, and Ni-based alloy. 9. Tool runout should be kept to a minimum for maximum accuracy. 10. When the cutting load fluctuates in areas such as the corners, please reduce the rotational speed.

osgtool.com

1485

End Mill Technical

Powered by