A Brand AE-LNBD-N Advanced Performance Long Neck, Ball Nose End Mills for Non-Ferrous Materials
List 8990: 2 Flute, Stub Length, Long Neck, Ball End (Continued)
Contouring
Hardness
-
-
Work Material
Copper, Aluminum
Copper Alloy, Aluminum Alloy
Depth of Cut
Neck Length
Mill Dia.
Ar (Inch)
Speed RPM 10,000 10,000 9,000 9,000
Feed IPM 28.35 28.35 23.62 75.59 56.69 37.80 37.80 37.80 23.62 85.04 85.04 47.24 47.24 28.35
Aa (Inch)
Ar (Inch)
Speed RPM 12,000 12,000 10,800 10,800 10,800 4,800 4,800 4,800 6,000 10,800 10,800 8,400
Feed IPM 44.29 44.29 36.93 118.11
Aa (Inch)
mm mm 3 20
0.01575 0.01575 0.01575 0.03937 0.03937 0.03937 0.03937 0.03150 0.02756 0.04724 0.04724 0.04724 0.04724 0.03150
0.03307 0.03307 0.03307 0.05118 0.05118 0.05118 0.05118 0.05118 0.05118 0.07087 0.07087 0.07087 0.07087 0.07087
0.01417 0.01417 0.01417 0.03543 0.03543 0.03543 0.03543 0.02756 0.02362 0.04331 0.04331 0.04331 0.04331 0.02756
0.03307 0.03307 0.03307 0.05118 0.05118 0.05118 0.05118 0.05118 0.05118 0.07087 0.07087 0.07087 0.07087 0.07087
3 3 4 4 4 4 4 4 6 6 6 6 6
25 30 10 15 20 25 30 40 10 15 20 30 50
9.84
9,000 7,000 7,000 7,000 5,000 9,000 9,000 7,000 6,000 5,000
59.06 59.06 59.06 36.93
132.87 132.87 73.82 73.82 44.29
7,200 6,000
1. Use a rigid and precise machine and holder. 2. Please adjust the speed and feed when the cutting depth is large or when machines with low rigidity are used. 3. Use a water soluble fluid. 4. Use a non-water-soluble cutting fluid if the machined surface and accuracy are of critical importance. 5. Always use a cutting fluid recommended by the cutting fluid manufacturer as the workpiece may discolor.
osgtool.com
1472
End Mill Technical
Powered by FlippingBook