A Brand AE-BD-H Advanced Performance Carbide End Mills with DUROREY Coating
List 8410, 8510: 2 Flute, Stub Length, Ball End (Continued)
Finishing - High Speed Contouring Hardness Up to 45 HRC
45-55 HRC
55-62 HRC
62-66 HRC
66-70 HRC
Tool Steels Hardened Steels Alloy Steels
Work Material
Hardened Steels
Depth of Cut
a a a r 0.02D 0.05D
a a a r 0.01D 0.05D
a r a a
Mill Dia.
Feed (in/min)
Speed (RPM) 25,000 25,000 25,000 25,000 25,000 25,000 25,000 25,000 25,000 25,000 25,000 25,000 23,850 22,700 19,250 18,200 14,550 14,450 12,100 11,550 9,450 8,950
Feed (in/min)
Speed (RPM) 25,000 25,000 25,000 25,000 25,000 25,000 25,000 25,000 25,000 25,000 25,000 24,000 20,150 19,200 16,150 15,300 12,000 11,900 10,000 9,500 8,000 7,550
Feed (in/min)
Speed (RPM) 25,000 25,000 25,000 25,000 25,000 25,000 25,000 25,000 25,000 25,000 23,850 19,150 16,300 15,500 12,600 11,900 9,550 9,450
Feed (in/min)
Speed (RPM) 25,000 25,000 25,000 25,000 25,000 25,000 25,000 24,050 22,900 19,100 18,050 14,300 12,000 11,450
Feed (in/min)
Speed (RPM) 25,000 25,000 25,000 25,000 25,000 25,000 25,000 25,000 25,000 25,000 25,000 25,000 25,000 25,000 24,600 23,250 18,750 18,600 15,750 15,000 12,600 11,900
(Inch)
(mm)
–
0.2 0.8 1.4 1.5 1
20.8 63.6 72.8 88.2 94.5 87.5
20.8 63.6 72.8 88.2 94.5 83.6
17.5 53.3 61.0 71.7 76.8 59.4 74.8 89.1 90.0
14.6 44.7 51.2 56.0 60.0 57.0 71.8 85.4 86.4 99.6 94.2 84.2 84.1 80.7 100.6
13.5 41.3 47.2 55.0 59.0 57.0 71.8 82.2 78.3 74.4 74.4 70.4 62.6 62.7 61.3 61.2 53.5 53.5 45.4 45.3 38.8 38.9
1/32
– – –
1/16
– 2 – 3 – 4 – 5 6 – – 8 –
–
110.2 131.3 120.0 122.5 129.7 150.8 170.3 178.8 204.7 204.8 175.2 175.2 155.5 155.5 145.7 145.6
105.3 125.4 117.1 123.0 130.2 150.4 156.9 156.8 136.2 136.3 120.4 120.5 104.6 104.8
3/32
– –
2.5
103.7 109.7 126.0 112.2 112.2 100.1 100.3
1/8
–
3/16
– –
9,550 9,000 7,200 7,150 6,100 5,800 4,750 4,500
1/4
80.7 70.7 70.5 60.8 60.6 53.1 53.2
5/16
88.6 88.6 75.0 74.8 63.0 62.9
–
3/8
7,950 7,550 6,400 6,050
– –
10 12
97.9 98.1
1/2
–
1. Use a rigid and precise machine and holder. 2. We suggest using air blow or MQL (mist). 3. The above parameters are standard starting values for contouring and side milling operations. If vibration or chatter occurs due to machine or part setup, please adjust the speed, feed, and depth of cut accordingly. 4. If the cutting depth is small it is possible to increase the speed and feed above the recommended parameters.
osgtool.com
1462
End Mill Technical
Powered by FlippingBook