A Brand AE-BD-H Advanced Performance Carbide End Mills with DUROREY Coating
List 8410, 8510: 2 Flute, Stub Length, Ball End
Finishing - Contouring Hardness
Up to 45 HRC
45-55 HRC
55-62 HRC
62-66 HRc
66-70 HRC
Tool Steels Hardened Steels Alloy Steels
Work Material
Hardened Steels
Cutting Speed (SFM)
345 (265-395)
310 (230-360)
195 (130-265)
195 (165-230)
165 (130-195)
Depth of Cut
a a a r 0.05D 0.1D
a a a r 0.03D 0.1D
a a a r 0.02D 0.05D
a r a a
Mill Dia.
Speed (RPM) 25,000 25,000 25,000 25,000 25,000 25,000 25,000 25,000 25,000 25,000 25,000 24,000 20,150 19,200 16,150 15,300 12,000 11,900 10,000
Feed (in/min)
Speed (RPM) 25,000 25,000 25,000 25,000 25,000 25,000 25,000 25,000 25,000 25,000 23,850 19,150 15,700 14,950 12,600 11,900
Feed (in/min)
Speed (RPM) 25,000 25,000 25,000 25,000 25,000 25,000 25,000 24,050 22,900 19,100 18,050 14,300 12,000 11,450
Feed (in/min)
Speed (RPM) 25,000 25,000 25,000 25,000 25,000 25,000 23,750 19,950 19,400 16,150 15,300 11,900 10,000
Feed (in/min)
Speed (RPM) 25,000 25,000 25,000 25,000 20,000 20,000 19,000 15,960 15,520 12,920 12,240
Feed (in/min)
(Inch)
(mm)
-
0.2
14.8 49.2 60.2 73.0 78.2 73.2 92.3
14.8 49.2 60.2 73.0 78.2 72.2 91.0
14.8 49.2 51.3 59.8 64.1 59.7 75.2 86.1 82.2 78.3 78.3 74.3 66.5 66.6 61.3 61.2 53.5 53.5 45.4 45.3 37.2 37.3
11.7 35.8 41.0 54.9 58.8 57.0 68.2 68.2 66.2 62.8 63.0 59.1 53.3 53.1 48.6 48.8 41.7 41.7 34.2 34.1 30.9 31.1
9.4
1/32 0.8
28.6 32.8 43.9 47.0 45.6 54.6 54.6 53.0 50.2 50.4 47.3 42.6 42.5 38.9 39.0 33.4 33.4 27.4 27.3 24.7 24.9
- - -
1.0 1.4 1.5
1/16 -
-
2.0
3/32 -
109.9 109.3 123.8 131.0 143.7 137.7 137.8 131.5 131.8 112.3 112.2 100.7 100.4
108.3 108.9 125.0 126.2 115.8 104.0 104.0
- -
2.5 3.0
1/8
-
-
4.0
9,520 8,000 7,600 6,320 6,000 4,800 4,760 4,000 3,800 3,160 3,000
3/16 -
- -
5 6
9,500 7,900 7,500 6,000 5,950 5,000 4,750 3,950 3,750
90.6 90.5 80.5 80.3 70.6 70.4 65.0 65.0
9,550 9,000 7,200 7,150 6,100 5,800 4,750 4,500
1/4
-
5/16 -
9,550 9,450 7,950 7,550 6,400 6,050
-
8
3/8
-
- -
10 12
9,500 8,000 7,550
94.5 94.4
1/2
-
1. Use a rigid and precise machine and holder. 2. We suggest using air blow or MQL (mist). 3. The above parameters are standard starting values for contouring and side milling operations. If vibration or chatter occurs due to machine or part setup, please adjust the speed, feed, and depth of cut accordingly. 4. If the cutting depth is small it is possible to increase the speed and feed above the recommended parameters.
osgtool.com
1461
End Mill Technical
Powered by FlippingBook