PHX Phoenix Deep Feed Radius End Mill
Side Milling
Hardness
<40 HRC
40-55 HRC
55-60 HRC
Mild Steels and Carbon Steels
Hardened Steels and Prehardened Steels
Work Material
High Feed Roughing
Semi-Finishing
Finishing
Cutting Speed
60-410 SFM
60-250 SFM
60-410 SFM
Rec’d Cutting Angle
Stock to Remove (in)
D (mm)
r (mm)
Speed (RPM)
Feed (in/min)
Speed (RPM)
Feed (in/min)
Speed (RPM)
Feed (in/min)
L1
Depth of Cut (in)
Depth of Cut (in)
Depth of Cut (in)
Aa
Ar
Aa
Ar
Aa
Ar
30 0.5° 40 0.5° 48 0.5° 56 0.5° 64 0.5° 80 0.5° 100 0.5° 120 0.5° 35 0.5° 50 0.5° 60 0.5° 70 0.5° 80 0.5° 100 0.5° 120 0.5° 140 0.5° 160 0.5° 45 0.5° 60 0.5° 70 0.5° 85 0.5° 100 0.5° 120 0.5° 140 0.5° 160 0.5° 55 0.5° 80 0.5° 90 0.5° 105 0.5° 120 0.5° 70 0.5° 90 0.5° 110 0.5° 130 0.5° 150 0.5°
4,800 78.7 0.0197 0.0669 3,000 49.2 0.0118 0.0630 4,800 70.9 0.0071 0.0630 0.0039 3,800 74.8 0.0157 0.0630 3,000 49.2 0.0118 0.0630 3,800 55.1 0.0071 0.0630 0.0039 3,200 66.9 0.0106 0.0551 3,000 49.2 0.0102 0.0551 2,300 45.3 0.0071 0.0630 0.0028 2,700 51.2 0.0079 0.0551 2,700 43.3 0.0079 0.0551 2,700 39.4 0.0071 0.0630 0.0028 1,900 34.6 0.0079 0.0512 1,900 31.5 0.0079 0.0512 1,900 27.6 0.0071 0.0630 0.0020 1,500 27.6 0.0059 0.0512 1,500 27.6 0.0059 0.0512 1,500 21.7 0.0071 0.0630 0.0012 1,200 25.6 0.0059 0.0512 1,200 25.6 0.0059 0.0512 1,200 19.7 0.0071 0.0630 0.0012 1,000 21.7 0.0039 0.0512 1,000 21.7 0.0039 0.0512 1,000 17.7 0.0071 0.0630 0.0012 3,800 82.7 0.0197 0.0984 2,400 94.5 0.0118 0.0630 3,800 149.6 0.0079 0.0945 0.0039 3,100 76.8 0.0157 0.0945 2,400 94.5 0.0118 0.0630 3,100 122.0 0.0079 0.0945 0.0039 2,500 68.9 0.0106 0.0787 2,400 94.5 0.0106 0.0630 2,500 98.4 0.0079 0.0945 0.0039 2,200 53.1 0.0079 0.0787 2,200 86.6 0.0079 0.0630 2,200 86.6 0.0079 0.0945 0.0028 1,500 35.4 0.0075 0.0787 1,500 59.1 0.0075 0.0630 1,500 59.1 0.0079 0.0945 0.0028 1,200 28.3 0.0063 0.0787 1,200 47.2 0.0063 0.0630 1,200 47.2 0.0079 0.0945 0.0020 1,050 25.6 0.0051 0.0787 1,000 39.4 0.0051 0.0630 1,050 41.3 0.0079 0.0945 0.0020
8.0
R2
10.0
850 21.7 0.0039 0.0591 800 700 19.7 0.0028 0.0591 700
31.5 0.0039 0.0551 850 27.6 0.0028 0.0551 700
33.5 0.0079 0.0945 0.0012 27.6 0.0079 0.0945 0.0012
3,200 86.6 0.0236 0.1339 2,000 78.7 0.0118 0.0630 3,200 126.0 0.0094 0.1260 0.0059 2,500 82.7 0.0197 0.1260 2,000 78.7 0.0118 0.0630 2,500 98.4 0.0094 0.1260 0.0059 2,100 74.8 0.0157 0.1102 2,000 78.7 0.0110 0.0630 2,100 82.7 0.0094 0.1260 0.0039 1,800 59.1 0.0118 0.1063 1,500 59.1 0.0087 0.0630 1,800 70.9 0.0094 0.1260 0.0039 1,300 39.4 0.0079 0.1024 1,200 47.2 0.0079 0.0630 1,300 51.2 0.0094 0.1260 0.0039 1,000 27.6 0.0059 0.0984 1,000 39.4 0.0059 0.0630 1,000 39.4 0.0094 0.1260 0.0020
12.0
900 23.6 0.0059 0.0787 900 700 19.7 0.0039 0.0787 700
35.4 0.0039 0.0630 900 27.6 0.0039 0.0630 700
35.4 0.0094 0.1260 0.0020 27.6 0.0094 0.1260 0.0020
2,400 78.7 0.0197 0.1654 1,500 59.1 0.0118 0.0630 2,400 94.5 0.0118 0.1575 0.0079 1,900 74.8 0.0185 0.1575 1,500 59.1 0.0118 0.0630 1,900 74.8 0.0118 0.1575 0.0059 1,600 66.9 0.0157 0.1339 1,500 59.1 0.0118 0.0630 1,600 63.0 0.0118 0.1575 0.0039 1,400 51.2 0.0114 0.1299 1,400 55.1 0.0110 0.0630 1,400 55.1 0.0118 0.1575 0.0028 1,000 33.5 0.0079 0.1260 1,000 39.4 0.0079 0.0630 1,000 39.4 0.0118 0.1575 0.0020 1,900 78.7 0.0197 0.2165 1,200 47.2 0.0118 0.0630 1,900 74.8 0.0165 0.2165 0.0079 1,500 74.8 0.0185 0.2087 1,200 47.2 0.0118 0.0630 1,500 59.1 0.0165 0.2165 0.0059 1,300 66.9 0.0165 0.1654 1,200 47.2 0.0118 0.0630 1,300 51.2 0.0165 0.2165 0.0039 1,100 51.2 0.0122 0.1496 1,100 43.3 0.0118 0.0630 1,100 43.3 0.0165 0.2165 0.0028
16.0
R3
20.0
760 29.9 0.0098 0.1339 760
29.9 0.0091 0.0630 760
29.9 0.0165 0.2165 0.0020
1. The above mentioned conditions according to projection lengths are intended as general guidelines for reference only. Adjustments should be made based on actual milling conditions. 2. Highly rigid machines and tool holders should be used. 3. Tool vibrations should be kept at a minimum level for maximum accuracy. 6. More stable high-feed machining in the corners can be attained by setting an R insertion or deceleration on the CAM or machine side. 7. When cutting load fluctuates (in the corners, etc.) or when high-precision is required, be sure to control the rotational speed. 8. When cutting at greater than the recommended cutting angle, reduce the feed. 9. When the depth of cut is less than the specified amount as listed above, the feed rate can be increased up to 150%. 10. When the depth of cut is greater than the specified amount as listed above, the feed rate can be reduced by no more than 60% to ensure stable milling. 4. In the case of linear machining, do not use the Ar value, instead refer to the Aa value. 5. Under general machining conditiona, air-blow cutting method is recommended.
osgtool.com
1433
End Mill Technical
Powered by FlippingBook