AE-LN-CR-VMS Advanced Performance Anti-Vibration Carbide End Mills
List 8220 - A Brand AE-LN-CR-VMS: 4 Flute, Long Neck, Corner Radius
Side Milling Hardness
–
Up to 30 HRC
–
–
–
–
30-45 HRC
Mild Steels Carbon Steels Cast Iron
Prehardened Steels Hardened Steels
Work Material Cutting Speed (SFM) Depth of Cut a a ar Mill Dia. (Inch)
Tool Steels Alloy Steels
Precipitation Stainless
Ni-Based Alloys Inconel 718
Stainless Steels
Titanium Alloy
260-395
230-360
130-260
150-195
130-170
50-80
130-260
a a a r 1.5D 0.02D
Speed (RPM)
Feed (in/min)
Speed (RPM)
Feed (in/min)
Speed (RPM)
Feed (in/min)
Speed (RPM)
Feed (in/min)
Speed (RPM)
Feed (in/min)
Speed (RPM)
Feed (in/min)
Speed (RPM)
Feed (in/min)
1/4
5,191 4,153 3,461 2,966 2,595 2,076 1,730 1,298
62.3 49.8 47.1 46.3 40.5 32.4 27.0 20.2
4,809 3,847 3,206 2,748 2,405 1,924 1,603 1,202
46.2 36.9 41.0 39.6 37.5 30.0 25.0 18.8
2,748 2,198 1,832 1,570 1,374 1,099
16.5 13.2 13.9 14.4 13.7 11.0
2674 2139 1783 1528 1337 1070
17.5 14.3 13.7 13.4 13.2 13.0 12.4 16.1
2598 2078 1732 1484 1299 1039
16.6 13.7 13.0 12.7 12.6 12.6 12.1 15.4
1222
6.8 6.4 6.2 5.9 5.8 5.8 5.6 5.3
3,511 2,809 2,341 2,007 1,756 1,405 1,170
28.1 22.5 24.3 22.5 19.7 15.7 13.1 10.5
5/16
978 815 699 611 489 407 306
3/8
7/16
1/2 5/8 3/4
916 687
9.2 6.9
891 669
866 649
1
878
1. Use a rigid and precise machine and holder. 2. The rotational speed is calculated by the median of the recommended cutting speed. 3. Adjustments may be necessary depending on the rigidity or the workpiece, fixture, and machine. 4. Please use a suitable fluid with high smoke retardant properties. 5. During dry (no fluid) milling, please use air blow to remove chips from the milling area and to eliminate chip packing. 6. Please use water-soluble coolant when machining stainless steel. 7. Reduce speed and feed as well as depth of cut when high precision is required.
osgtool.com
1427
End Mill Technical
Powered by FlippingBook