AE-VMS Advanced Performance Anti-Vibration Carbide End Mills
List 8210 - A Brand AE-CR-VMS : 4 Flute, Multiple Lengths, Corner Radius List 8215 - A Brand AE-CR-VMS : 4 Flute, Regular Length, Corner Radius
Side Milling Hardness
–
Up to 30 HRC
–
–
–
–
30-45 HRC
Mild Steels Carbon Steels Cast Iron
Prehardened Steels Hardened Steels
Work Material Cutting Speed (SFM) Depth of Cut a a ar
Tool Steels Alloy Steels
Precipitation Stainless
Ni-Based Alloys Inconel 718
Stainless Steels
Titanium Alloy
330-490
330-490
200-330
230-300
200-260
80-130
260-395
a a a r 1.5D 0.2D
Mill Dia.
Speed (RPM)
Feed (in/min)
Speed (RPM)
Feed (in/min)
Speed (RPM)
Feed (in/min)
Speed (RPM)
Feed (in/min)
Speed (RPM)
Feed (in/min)
Speed (RPM)
Feed (in/min)
Speed (RPM)
Feed (in/min)
Inch mm – 3
13,896 55.6 12,765 35.7
8,079 6,059 5,089 4,847 4,201 3,969 3,176 3,151 2,646 2,521 2,268 2,101 1,985 1,588 1,323
16.2 19.4 16.3 17.5 21.8 20.6 16.5 21.4 18.0 20.2 18.1 18.5 17.5 14.0 11.6
9760 7320 6016 5860 4880 4512 3609 3200 3008 2560 2578 2140 2256 1805 1504 1128
20.1 21.7 22.0 22.0 22.8 21.9 17.9 17.7 17.1 16.9 16.7 16.5 16.5 16.2 15.5 20.1
8490 6370 5347 5090 4240 4010 3208 2790 2674 2230 2292 1860 2005 1604 1337 1003
18.9 20.9 21.2 21.3 21.7 20.8 17.1 16.9 16.3 16.1 15.9 15.7 15.7 15.7 15.1 19.3
4240 3180 2674 2550 2120 2005 1604 1590 1337 1270 1146 1060 1003
8.7 9.4 9.7 9.8 9.8 9.7 9.1 9.1 8.8 8.7 8.4 8.3 8.3 8.3 8.0 7.5
10,664 25.6
–
4
10,422 62.5
9,573 8,041 7,659 6,382 6,031 4,824 4,787 4,020 3,829 3,446 3,191 3,015 2,412 2,010 1,508
38.3 32.2 39.8 56.2 53.1 42.5 57.4 48.2 52.1 46.9 48.5 45.8 36.7 30.6 22.9
7,998 6,718 6,398 5,332 5,038 4,031 3,999 3,359 3,199 2,879 2,666 2,519 2,015 1,679 1,260
25.6 21.5 28.2 38.4 36.3 29.0 36.8 30.9 32.0 28.8 26.7 25.2 20.2 16.8 12.6
3/16 –
8,753 8,337 6,948 6,565 5,252 5,211 4,377 4,169 3,751 3,474 3,282 2,626 2,188 1,641
52.5 66.7 77.8 73.5 58.8 66.7 56.0 61.7 55.5 51.4 48.6 38.9 32.4 24.3
– –
5 6 –
1/4
5/16 –
–
8 –
3/8
–
10
7/16 –
–
12
1/2 5/8 3/4
– – – –
802 668 501
1
992
8.7
1. The above milling condition is a guidline for overhang length 3D. 2. Use a rigid and precise machine and holder. 3. Please use a suitable fluid with high smoke retardant properties. 4. During dry (no fluid) milling, please use air blow to remove chips from the milling area and to eliminate chip packing.
5. Please use water-soluble coolant when machining stainless steel./6. Reduce speed and feed as well as depth of cut when high precision is required. 7. Adjust the speed and feed accordingly when the overhang length is longer than specified (refer to Parameter Reduction Chart on next page).
osgtool.com
1425
End Mill Technical
Powered by FlippingBook