HY-PRO ® CARB VGM3-AL High Performance Variable Geometry End Mills
List VGM3-AL: 3 Flute
Side Milling Work Material
Slotting Work Material
Aluminum Alloy A6061, A7075 Copper Alloy C1100 Cutting 600 - 1,700 SFM 600 - 1,700 SFM 400 - 1,200 SFM Aluminum Alloy Casting
Aluminum Alloy A6061, A7075 Copper Alloy C1100 Cutting 400 - 1,300 SFM 400 - 1,300 SFM 240 - 800 SFM Aluminum Alloy Casting
Depth of Cut
Aa = 1.5xD Ar = 0.2xD
Aa = 1.5xD Ar = 0.1xD
Depth of Cut
Aa = 1xD
Aa = 0.5xD
Speed RPM
Feed IPM
Speed RPM
Feed IPM
Speed RPM
Feed IPM
Speed RPM
Feed IPM
Speed RPM
Feed IPM
Speed RPM
Feed IPM
Mill Dia.
Mill Dia.
1/8 25,000 112.5 25,000 112.5 24,500 73.5 3/16 23,500 158.6 23,500 158.6 16,300 73.4 1/4 17,600 158.4 17,600 158.4 12,300 73.8 5/16 14,100 158.6 14,100 158.6 9,800 73.5 3/8 11,800 159.3 11,800 159.3 8,200 73.8 7/16 10,100 159.1 10,100 159.1 7,000 73.5 1/2 8,800 158.4 8,800 158.4 6,200 74.4 5/8 7,100 159.8 7,100 159.8 4,900 73.5 3/4 5,900 159.3 5,900 159.3 4,100 73.8 1 4,400 158.4 4,400 158.4 3,100 74.4 1. Use a rigid and precise machine and holder. 2. The indicated speeds and feeds are for milling with water-soluble coolant. 3. Please adjust the speed and feed when the cutting depth is large or when machines with low rigidity are used. 4. Reduce speed and feed as well as depth of cut when high precision is required. 5. Always use the appropriate cutting fluid recommended by the cutting fluid manufacturer in the machining of magnesium alloys. 6. Be cautious with the cutting chips as they are highly flammable and may pose a serious fire risk if not properly handled.
1/8 25,000 93.8 25,000 93.8 15,900 47.7 3/16 17,300 97.3 17,300 97.3 10,600 47.7 1/4 13,000 97.5 13,000 97.5 8,000 48.0 5/16 10,400 97.5 10,400 97.5 6,400 48.0 3/8 8,700 97.9 8,700 97.9 5,300 47.7 7/16 7,500 98.4 7,500 98.4 4,600 48.3 1/2 6,500 97.5 6,500 97.5 4,000 48.0 5/8 5,200 97.5 5,200 97.5 3,200 48.0 3/4 4,400 99.0 4,400 99.0 2,700 48.6 1 3,300 99.0 3,300 99.0 2,000 48.0 1. Use a rigid and precise machine and holder. 2. The indicated speeds and feeds are for milling with water-soluble coolant. 3. Please adjust the speed and feed when the cutting depth is large or when machines with low rigidity are used. 4. Reduce speed and feed as well as depth of cut when high precision is required. 5. Always use the appropriate cutting fluid recommended by the cutting fluid manufacturer in the machining of magnesium alloys. 6. Be cautious with the cutting chips as they are highly flammable and may pose a serious fire risk if not properly handled.
Plunging Work Material
Aluminum Alloy A6061, A7075
Aluminum Alloy Casting
Copper Alloy C1100
Cutting
350 SFM
350 SFM
200 SFM
Depth of Cut
Aa = 1xD
Aa = 0.5xD
Speed RPM
Feed IPM
Speed RPM
Feed IPM
Speed RPM
Feed IPM
Mill Dia.
1/8
10,700 12.0 10,700 12.0 6,200 7,200 12.2 7,200 12.2 4,100 5,400 12.2 5,400 12.2 3,100 4,300 12.1 4,300 12.1 2,500 3,600 12.2 3,600 12.2 2,100 3,100 12.2 3,100 12.2 1,800 2,700 12.2 2,700 12.2 1,600 2,200 12.4 2,200 12.4 1,300 1,800 12.2 1,800 12.2 1,100 1,400 12.6 1,400 12.6 800
4.7 4.6 4.7 4.7 4.7 4.7 4.8 4.9 5.0 4.8
3/16
1/4
5/16
3/8
7/16
1/2 5/8 3/4
1
1. Use a rigid and precise machine and holder. 2. The indicated speeds and feeds are for milling with water-soluble coolant. 3. Please adjust the speed and feed when the cutting depth is large or when machines with low rigidity are used. 4. Reduce speed and feed as well as depth of cut when high precision is required. 5. Always use the appropriate cutting fluid recommended by the cutting fluid manufacturer in the machining of magnesium alloys. 6. Be cautious with the cutting chips as they are highly flammable and may pose a serious fire risk if not properly handled.
osgtool.com
1388
End Mill Technical
Powered by FlippingBook