AERO UVX-Ti Variable Lead End Mills for Titanium Alloy
List 2104: 5 Flute, Regular Length, Reduced Neck, Square End List 2110: 5 Flute, Regular Length, Reduced Neck, Corner Radius
Side Milling
Slotting
Cutting Speed
200-265 SFM
100-165 SFM
a a≤1.8D a r=0.2D
Depth of Cut
a
a≤1D
Speed RPM
Feed in/min
Speed RPM
Feed in/min
Mill Dia.
12 16 20 25
1,900 1,400 1,100
33.7 24.8 23.6 19.7
1,100
10.8
820 655 525
8.1 7.7 6.2
900
1. Use a rigid and precise machine and holder. 2. The above cutting conditions are to be used as general guidelines. Please adjust the speed, feed and cutting depth according to actual cutting conditions. 3. Water soluble coolant is highly recommended.
osgtool.com
1375
End Mill Technical
Powered by FlippingBook