WXL ® Premium Performance Carbide End Mills with OSG's Proprietary WXL Coating
List 3723: 2 Flute, Long Length
Side Milling
Hardness
–
<32 HRC
33-41 HRC
42-50 HRC
Copper Copper Alloy
Mild Steels Carbon Steels
Hardened Steels, Pre-hardened Steels Stainless Steels
Work Material
Cutting Speed
66-116 SFM
46-76 SFM
39-76 SFM
57-67 SFM
a a
a r
Dia
Dia a r D<1 4D 0.05D 1≤D 4D 0.01D a a
D<0.3 4D 0.015D 0.3≤D<1 4D 0.03D 1≤D<3 4D 0.05D 3≤D 4D 0.1D
Depth of Cut
Speed RPM 25,000 25,000 22,070 17,660 14,720 12,610 11,040
Feed in/min
Speed RPM 25,000 19,730 14,800 11,840
Feed in/min
Speed RPM 25,000 18,600 13,950 11,160
Feed in/min
Speed RPM
Feed in/min
Mill Dia.
0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 5.0 5.1 5.2 5.3 5.4 5.5
2.8 3.4 3.8 4.2 4.3 3.7 4.3 3.9 4.3 4.7 4.4 4.3 4.3 4.3 4.1 4.0 4.0 4.0 4.0 4.1 4.5 4.4 4.3 4.7 4.8 5.2 5.2 5.1 5.1 5.6 5.8 5.8 5.8 5.7 5.7 5.9 6.2 6.3 6.2 6.4 6.8 6.7 7.1 7.4 7.2 7.0 6.9 7.4 7.3 7.5 7.4 7.7 7.5 7.4
1.3 1.4 1.6 1.6 1.6 1.6 1.6 1.6 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.7 1.8 1.7 1.7 1.7 2.0 1.9 2.1 2.1 2.1 2.1 2.1 2.3 2.2 2.3 2.4 2.4 2.7 2.6 2.5 2.6 2.5 2.8 2.7 2.7 2.8 2.9 2.8 2.9 2.9 3.0 2.9 3.1 3.2 3.1 3.0 3.2 3.2 3.1
1.5 1.3 1.3 1.4 1.5 1.8 1.8 1.8 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.5 1.6 1.5 1.6 1.5 1.5 1.5 1.5 1.4 1.4 1.6 1.6 1.6 1.7 1.8 1.7 1.9 2.0 1.9 2.0 2.1 2.0 2.1 2.2 2.2 2.1 2.2 2.2 2.1 2.1 2.0 2.0 2.1 2.0 2.0 2.0 2.1 2.0 2.0
- - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - -
9,860 8,460 7,400 6,580 5,920 5,380 4,930 4,550 4,230 3,950 3,700 3,480 3,290 3,120 2,960 2,820 2,690 2,570 2,470 2,370 2,280 2,190 2,110 2,040 1,970 1,910 1,850 1,790 1,740 1,690 1,640 1,600 1,560 1,520 1,480 1,440 1,410 1,380 1,350 1,320 1,290 1,260 1,230 1,210 1,180 1,160 1,140 1,120 1,100 1,080
9,300 7,970 6,970 6,200 5,580 5,070 4,650 4,290 3,990 3,720 3,490 3,280 3,100 2,940 2,790 2,660 2,540 2,430 2,320 2,230 2,150 2,070 1,990 1,920 1,860 1,800 1,740 1,690 1,640 1,590 1,550 1,510 1,470 1,430 1,390 1,360 1,330 1,300 1,270 1,240 1,210 1,190 1,160 1,140 1,120 1,090 1,070 1,050 1,030 1,010
9,810 8,830 8,030 7,360 6,790 6,310 5,890 5,520 5,190 4,910 4,650 4,410 4,200 4,010 3,840 3,680 3,530 3,400 3,270 3,150 3,040 2,940 2,850 2,760 2,680 2,600 2,520 2,450 2,390 2,320 2,260 2,210 2,150 2,100 2,050 2,010 1,960 1,920 1,880 1,840 1,800 1,770 1,730 1,700 1,670 1,640 1,610
2,010 1,940 1,880 1,820 1,770 1,720 1,670 1,630 1,580 1,540 1,500 1,470 1,430 1,400 1,370 1,340 1,310 1,280 1,250 1,230 1,200 1,180 1,160 1,140 1,110 1,090
3.1 3.2 3.3 3.4 3.3 3.4 3.5 3.6 3.5 3.4 3.8 3.7 3.6 3.5 3.7 3.8 3.8 3.7 3.6 3.5 3.6 3.9 3.8 3.7 3.7 3.9
1. Use a rigid and precise machine and holder. 2. Use a suitable cutting fluid with high smoke retardant. 3. When the length of tool extension from the machine is long, reduce the speed and feed.
osgtool.com
1362
End Mill Technical
Powered by FlippingBook