WXL ® Premium Performance Carbide End Mills with OSG's Proprietary WXL Coating
Slotting
Hardness
–
<32 HRC
33-41 HRC
42-50 HRC
Copper Copper Alloy
Mild Steels Carbon Steels
Hardened Steels, Pre-hardened Steels Stainless Steels
Work Material
Cutting Speed
52-522 SFM
33-251 SFM
33-186 SFM
33-159 SFM
a a
Dia D<1
0.1D 1≤D<3 0.3D 3≤D 0.5D
Depth of Cut
Speed RPM
Feed in/min
Speed RPM
Feed in/min
Speed RPM
Feed in/min
Speed RPM
Feed in/min
Mill Dia.
5.7 5.8 5.9 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5
8,500 8,400 8,200 7,900 7,500 6,900 6,400 5,900 5,600 5,300 5,100 4,700 4,400 4,000 3,000 2,700 2,400
21.3 20.9 20.9 20.9 20.9 20.9 20.9 20.5 20.5 20.1 20.1 19.7 19.7 20.1 15.7 14.2 11.8
4,200 4,200 4,100 4,000 3,700 3,400 3,200 3,000 2,800 2,600 2,500 2,400 2,200 2,000 1,500 1,300 1,200
10.6 10.6 10.6 10.6 10.6 10.6 10.6 10.2 10.2 10.2 10.2
3,100 3,000 2,900 2,900 2,700 2,500 2,300 2,200 2,000 1,900 1,800 1,700 1,600 1,400 1,100
5.1 5.1 5.1 5.1 5.1 5.1 5.1 4.9 4.9 4.9 4.9 4.9 4.9 4.9 4.5 3.9 3.5
2,600 2,600 2,500 2,500 2,300 2,100 2,000 1,900 1,700 1,500 1,400 1,500 1,100 1,200
3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.7 3.7 3.7 3.7 3.1 2.8 2.4
10.0 11.0 12.0 16.0 18.0 20.0
9.8 9.8 9.8 7.9 7.1 5.9
800 700 600
900 800
1. Use a rigid and precise machine and holder. 2. Use a suitable cutting fluid with high smoke retardant. 3. When the length of tool extension from the machine is long, reduce the speed and feed.
osgtool.com
1361
End Mill Technical
Powered by FlippingBook