Precision Instruments Spring Edition
Small Tool Instruments and Data Management
Form Measurement
Digital Scales and DRO Systems
Optical Measurement
Sensor Systems
Test Equipment
Vision Measuring Systems
SPRING PROMO 2026 PRECISION TOOLS & INSTRUMENTS Effective April 1 through June 30
Save up to an additional 15% OFF with DGI Supply
Bulletin No. 2394(P)
6
10
14
PRODUCTS NEW FEATURED
24
30
22
Dear Valued Customers, I want to thank you for your continued support of the Mitutoyo product and our team members in operations around the world. As we begin the new year, it has already proven to be a busy and exciting time for all of us at Mitutoyo America and Mitutoyo Canada Inc. We have worked closely with our factory and development staff to continue to expand our product lineup and overall capability with new products and enhancements to some tools that have been a part of our brand for many years. In addition, we have continued to expand programs to provide support and resources to you, your team and the supply chain we all depend on. One example of these programs is our educational content that will help you support new employees or skill development for existing staff when new challenges are faced. You will find access to these programs from our main website (Mitutoyo.ca). Look under the “Resources” tab and then click on “Training & Education.” While on the website, you may also look up our calibration and repair programs. You may be surprised to also find new services offered such as contract inspection and contract part programming. I hope that you explore these programs and reach out to one of the Mitutoyo Sales Representatives or valued distributor partners for more information. The 2026 Mitutoyo Spring Promotion discounts on the most commonly used tools and instruments you will find in shops all around the country. We hope this promotion will support your needs with valuable packages and discounts. Once again, I thank you for your continued support of Mitutoyo-made measuring solutions. Sincerely,
TABLE OF CONTENTS
MDE QuantuMike ......................................... 6 The new MDE QuantuMike delivers faster measurements - up to 4x faster than standard micrometers - with exceptional accuracy (±1 µm permissible error), an IP65 protection rating, and a user-friendly design with enhanced display. LH-600F Linear Height Gages ....................10 The Mitutoyo LH-600F Linear Height Gage is the latest model in the line with several new features like an adjustable and rotatable display, intuitive touchscreen interface, and added output options for even easier, highly accurate 1D and 2D dimensional measurements. ID-C/ID-F Digimatic Indicators ................... 14 The new Digimatic Indicators have higher resolutions down to 20 µinch/0.5 µm, a built-in calibration date warning and analog bar on the larger LCD display, and new S1 Digimatic output capabilities. Profile Projectors ....................................... 22 Mitutoyo profile projectors provide some of the most accurate and clear images on the market. Easily capture accurate measurements without blurring, distortion or complex calculations using our modular 2D digital readouts. QM-Fit .........................................................24 The new QM-Fit is an all-in-one smart measurement system that delivers fast, effortless results. Automatic element detection instantly recognizes a workpiece, identifies features, and performs the measurement. Surftest SJ-220 ...........................................30 Mitutoyo surface roughness testers are highly versatile and deliver precise, accurate measurements across a wide range of applications, including portable models.
Calipers ................................................4 Calipers/Caliper Checker ....................5 QuantuMike/QuickMike .....................6 Micrometers ........................................7 Tool Kits ...........................................8,9 LH-600F Height Gage.........................10 QM Height Gage................................11 Dial Indicators ...................................12 Bore Gages ........................................12 Dial Test Indicators ...........................13 Indicators .....................................14,15 Specialized Indicators.......................16 Borematic ..........................................17 Holtest ...............................................18 Bluetooth ® + Wireless Data Transmitters ......................................20 U-WAVE Wireless Data Transmitters and MeasurLink SPC software ..............21 Profile Projectors .........................22,23 QM-Fit ...........................................24,25 Quick Image..................................26,27 Microscopes ..................................28,29 Surftest SJ-220 .............................30,31 Hardness Testers ..........................32,33 Linear Gages/EJ Counters ...........34,35 Litematic Units with Vacuum...........36 Laser Scan Micrometers ...................37 Linear Encoders for Lathes, Grinders, and Mills............................38 Digimatic Scales ................................39
Matt Dye President, Mitutoyo America Corporation and Mitutoyo Canada
2
In-Stock Calibrated Tools
15% OFF with DGI Supply when you shop on-line or call!
All prices are in Canadian Dollars
In-Stock Calibrated Tools
Order No.
Description
List
Promo $381.00 $315.90 $307.80 $632.66 $588.80 $273.60 $369.21 $290.12 $388.38 $557.84 $333.90 $488.70 $306.00
293-330-30DCAL 293-340-30DCAL 500-171-30DCAL 500-173-30DCAL 500-193-30DCAL 500-196-30DCAL 500-197-30DCAL 500-752-20DCAL 500-753-20DCAL 500-754-20DCAL 505-743JDCAL 505-746DCAL 543-783B-10DCAL
Micrometer, Digimatic 0-1”, .00005”/0-25.4mm, 0.001mm, SPC, IP65, W/Certificate Micrometer, Digimatic 0-1", .00005" / 0-25.4mm, 0.001mm, IP65, W/Certificate Caliper, Digimatic Encoder Technology 0-6", .0005" / 0-150mm, 0.01mm, SPC, W/Certificate Caliper, Digimatic Encoder Technology 0-12", .0005" / 0-300mm, 0.01mm, SPC, W/Certificate Caliper, Digimatic Encoder Technology 0-12", .0005" / 0-300mm, 0.01mm, W/Certificate Caliper, Digimatic Encoder Technology 0-6", .0005" / 0-150mm, 0.01mm, W/Certificate Caliper, Digimatic Encoder Technology 0-8", .0005" / 0-200mm, 0.01mm, W/Certificate
$424.00 $351.00 $342.00 $790.82 $736.00 $304.00 $410.23 $362.65 $485.48 $697.30 $371.00 $543.00 $340.00
Caliper, Digimatic 0-6", .0005" / 0-150mm, 0.01mm IP67, W/Certificate Caliper, Digimatic, 0-8", .0005" / 0-200mm, 0.01mm, IP67, W/Certificate Caliper, Digimatic 0-12", .0005" / 0-300mm, 0.01mm IP67, W/Certificate
Caliper, Mechanical, Dial , 0-8", .001" W/Certificate Caliper, Mechanical, Dial, 0-12", .001" W/Certificate
Indicator, Digimatic, ID-S .5", .0005" / 12.7mm, 0.01 mm, SPC, W/Certificate
Digimatic Calipers † AOS Electromagnetic inductive sensor improves environmental resistance against dirt, water and oil.
Coolant-Proof Calipers † Sealed housing is IP67 rated, meaning it’s resistant to the coolants, dirt, grit and chips found in many manufacturing environments.
500-752-20-DCAL
500-171-30-DCAL
Digimatic Micrometer † Range: 1” † Resolution: .00005” / 0.001mm † Features include: preset, Zero/ABS mode, Function Lock and more
Dial Calipers † Smooth sliding with high shock protection.
Digimatic Indicator † Range: .5” / 12.7mm † Resolution: .005” / 0.01mm † SPC Output
505-743J-DCAL
293-330-30-DCAL
543-783B-10DCAL
www.dgisupply.ca
3
15% OFF with DGI Supply when you shop on-line or call!
Calipers
All prices are in Canadian Dollars
OUTPUT MODELS SAME PRICE AS NON-OUTPUT MODELS
Digimatic Calipers
Data Management Software by Mitutoyo ENABLED
Order No.
Range
Remarks
List
Promo
No SPC Output Style 500-195-32
$218.00 $236.00 $341.00 $683.00 $218.00 $236.00 $341.00 $683.00 $1,237.00
0-4”/0-100mm .075” Round Depth Bar $227.00
500-196-32 500-197-32 500-193-30
0-6"/0-150mm 0-8"/0-200mm 0-12"/0-300mm
$246.00 $355.00 $711.00
500-171-30
AOS: Advanced Onsite Sensor
With SPC Output Style 500-170-32
† Step-measurement capable. † The data output function allows integration into Statistical Process Control and measurement systems. † Display character height: 9mm. † AOS applies to 4", 6" and 8" models. † Resolution: .0005”/0.01mm.
† AOS Electromagnetic Inductive Sensor improves environmental resistance against dirt, water and oil. † A battery life of approximately 3.5 years has been achieved under normal use through the adoption of the Mitutoyo ABSOLUTE scale. † The slider configuration features an ergonomic, thumb-friendly shape.
0-4”/0-100mm .075” Round Depth Bar $271.00
500-171-32 500-172-32 500-173-30 500-505-10
0-6”/0-150mm 0-8”/0-200mm 0-12”/0-300mm
$288.00 $379.00 $830.00
0-18”/0-450mm Without Thumb Roller $1,289.00 0-24”/0-600mm Without Thumb Roller $1,423.00
500-506-10 $1,366.00 500-507-10 0-40”/0-1000mm Without Thumb Roller $2,748.00 $2,638.00 SPC cable with data switch – 1m: 959149 2m: 959150 U-WAVE-Fit compatible
Order Numbers are subject to change, e.g. 500-196-30 will change to 500-196-32
Order No. 505-742J 505-743J 505-738 505-740J 505-746 505-749 505-742-56J
Range
Remarks
List
Promo $191.00 $279.00 $343.00 $175.00 $425.00 $396.00 $191.00
Dial Caliper † Smooth sliding with high shock protection. † Lock screw for dial bezel and for holding the sliding jaw position. † Can measure OD, ID, depth and steps. † Models available with carbide-tipped OD and ID jaws. 505-742-56J THE MITUTOYO ADVANTAGE Whatever your challenges are, Mitutoyo Canada supports you from start to finish. Mitutoyo is not only a manufacturer of top-quality measuring products but one that also offers quality support and services that last throughout your products‘ lifetime. Apart from the basics of calibration and repair, we offer product & metrology training, software support, as well as contract inspection and programming services. The Mitutoyo Advantage includes: † Consistently high-quality products, software, solutions, and accessories † Industry-leading local Service & Support with FAST turnaround times † Decreased wait time with the Expedited Services and the Calibrated Tools program using our in-house Repair & Calibration Departments † Accredited Calibration, Performed at Your Facility for Your Small Tools † Easy access to our Contract Inspection and Programming Services as well as our Custom Solution team
0 -6” .100”/rev 0 -8” .100”/rev
$199.00 $291.00 $357.00 $182.00 $443.00 $413.00 $199.00
0 -6” .100”/rev Carbide-tipped jaws
0 -6” .200”/rev 0 -12” .100/rev 0 -12” .200/rev 0 -6” .100”/rev
Black Dial Face
READ THE FULL MITUTOYO ADVANTAGE
Prices effective April 1 through June 30, 2026
4
Calipers / Caliper Checker
All prices are in Canadian Dollars
Coolant-Proof Calipers
† Sealed housing is IP67 rated, meaning it’s resistant to coolants, dirt, grit and chips found in many manufacturing environments. † Easy to use - no need to wipe or clean the scale. † .0005”/0.01mm resolution with ±.001” accuracy. † Automatic power On/Off. † Certificate of Inspection provided.
OUTPUT MODELS SAME PRICE AS NON-OUTPUT MODELS
COMPATIBLE WITH
Data Management Software by Mitutoyo ENABLED
Order No.
Range
List
Promo
Non-Output Style 500-752-20
$317.00 $423.00 733.00 $317.00 $423.00 $733.00
0-6”/0-150mm
$330.00
500-753-20 500-754-20*
0-8”/0-200mm $441.00 0-12"/0-300mm $764.00
COOLANT PROOF is the universal term of Mitutoyo Digimatic Small Tool Instruments that are free from measurement error and physical deterioration due to routine exposure to water, cutting oil or coolant. This high performance is achieved by using encoders that are inherently immune to contamination, where exposure is inevitable, combined with comprehensive sealing techniques and extremely oil-resistant materials to guarantee a long working life under normal operating conditions.
SPC Output Style 500-762-20
0-6”/0-150mm $390.00 0-8”/0-200mm $492.00 0-12”/0-300mm $847.00
500-763-20 500-764-20*
* ±.0015” accuracy
SPC cable – 1m: 05CZA624 2m: 05CZA625
U-WAVE Fit compatible
Digimatic Carbon Fiber Caliper
552-314-10
† Lightweight Digimatic Calipers that employ CFRP (Carbon Fiber Reinforced Plastics) in the beam and jaws. † Highly durable and easy to handle.
† Direct readout of ID measurements from the LCD. (Offset value can be set easily by pressing the Offset key.) † Preset function for setting a desired starting point. † With SPC data output. † Special models available with ceramic jaws which are suitable for measuring abrasive and magnetic products. † Can be used in workshop conditions exposed to coolant, water, dust or oil. † Incorporates ABSOLUTE measurement system. † Automatic power On/Off.
Data Management Software by Mitutoyo ENABLED
Order No.
Range Accuracy Resolution
List
Promo
552-312-10 0(.5”)*-18” +/-.002” .0005”/0.01mm $1,483.00 552-313-10 0(.5”)*-24” +/-.002” .0005”/0.01mm $1,678.00 552-314-10 0(1”)*-40” +/-.002” .0005”/0.01mm $2,991.00 552-315-10 0(1”)*-60” +/-.004” .0005”/0.01mm $3,575.00 552-316-10 0(1”)*-80” +/-.005” .0005”/0.01mm $5,593.00
$1,424.00 $1,611.00 $2,871.00 $3,432.00
$5,369.00 SPC cable – 1m: 05CZA624 2m: 05CZA625
In parentheses = ID smallest range
CERA Caliper Checker
CERA Caliper Checker † Permanently wrung, high grade CERA gage blocks in a protective metal casing. † Stands perpendicular for height gage inspection. * Also includes same features as CERA Gage Blocks
20% OFF
† Extremely high wear resistance, 3x better than carbide. † Corrosion proof – no oil needed. † Closest expansion coefficient to steel. † Anti-magnetic – keeps away steel dust. CERA (Zirconia Ceramic) Gage Blocks*
† High wringing force due to high density. † Crack and burr resistant. † Low thermal conductivity – excellent dimensional stability under brief temperature changes (from handling, etc.).
Order No. Range Remarks (length to check)
List
Promo
Outside measurement: 1”, 2”, 4”, 6”, 8”, 10”, 12” Inside measurement: 1”, 2”, 4”, 6”, 8”, 10”, 12”
$6,931.00 $5,545.00
515-565
0 - 12”
www.dgisupply.ca
5
15% OFF with DGI Supply when you shop on-line or call!
QuantuMike/QuickMike
All prices are in Canadian Dollars
QuantuMike High-speed, high-accuracy micrometer measures 4x faster vs standard micrometers
20% OFF
4x Faster 1µm Accuracy
New Features
GO/NG icons
Auto-calculate
Calibration alerts
Forewarning
† Go/No-go icons: at-a-glance verification † Calibration date alerts: warning and due date alerts † Approach Speed Warning: reduce over-torquing † Calculation: auto-calculate corrections and more † S1 Digimatic output — send measurement to Excel or easily program features with software (ITPak 3.0 or MeasurLink ® ) † Auto power On/Off. Key customization
Calendar icon flashes
Displays tolerance judgment mark Tolerance judgment function: ON
Correction value can be read directly Calculation function: ON Calculates and displays correction value
Pass
Due date
Entire display flashes
− NG
+ NG
Customized key setting allows the user to easily switch between measurement values and calculation results with the press of a button.
Continued Great Features
† 4x faster spindle speed † Preset, Zero, Hold, Function Lock, Error display
Promo
Order No. 293-180-40 293-181-40 293-182-40 293-183-40
Description
List
$348.00 $398.00 $474.00 $510.00
QUANTUMIKE MICROMETER, DIGIMATIC, 0-1", IP65, .00005", W/SPC $435.00 QUANTUMIKE MICROMETER, DIGIMATIC, 1-2", IP65, .00005", W/SPC $497.00 QUANTUMIKE MICROMETER, DIGIMATIC, 2-3", IP65, .00005", W/SPC $592.00 QUANTUMIKE MICROMETER, DIGIMATIC, 3-4", IP65, .00005", W/SPC $638.00
† 1-pc Rachet Thimble + Speeder † Resolution: .00005” / 0.001mm † Accuracy: +/- .00005” / 0.001mm
QuickMikes
The updated QuickMike series still boasts the super-fast spindle feed rate that’s 20x faster than standard micrometers. † IP65 protection – can be used around cutting fluids.
293-676-20
† MIN Hold – the minimum measurement can be held on the display for more repeatable and accurate measurements. † Larger LCD – 33% larger, 10mm character height. † Function lock – prevents accidental changes. † 5 year battery life – more operating time, less downtime looking for and replacing batteries. † Non-rotating spindle.
Order No. 293-676-22 293-677-22
Range
Resolution Accuracy
Flatness
Parallelism List
Promo
$889.00 $970.00
0 - 1.2” .00005”/0.001mm ±0.0001” 0.000012” 0.00008” $936.00 1 - 2.2” .00005”/0.001mm ±0.0001” 0.000012” 0.00008” $1,021.00
Order Numbers are subject to change, e.g. 500-196-30 will change to 500-196-32
SPC cable with data switch – 1m: 05CZA662 2m: 05CZA663
Prices effective April 1 through June 30, 2026
6
Micrometers
All prices are in Canadian Dollars
Purchase the world’s first 5µinch /0.1µm resolution micrometer and receive a USB input tool and cable (over $450 in value)
Using precision digital measuring tools together with a USB input tool improves both measurement results and data reliability. The high-accuracy MDH with 5 millionths resolution can output in its entirety in both inch and metric. Resulting data can input directly to Excel ® , MeasurLink ® or other SPC programs.
293-130-10
† Range: 0-1”, Resolution: .000005”, Accuracy: +/- .000020
Order No.
Description
List
MDH Micrometer with high accuracy, high resolution output
293-130-10
$2,566.00
05CZA662
05CZA662
Included
SPC CONNECTING CABLE (1M)
264-020
Included
USB INPUT TOOL
Data Management Software by Mitutoyo ENABLED
† Provided with zero set and in/mm (inch/metric models only) keys. † A ratchet stop or friction thimble for a constant measuring force. † Measurement readout with large characters on the LCD. † No spindle clamp. No data output. MDC-Lite Micrometer
264-020
293-831-30
Order No. 293-831-32 293-832-32
Range
Resolution
Remarks
List
Promo $226.00 $240.00
0 - 1” / 0 - 25.4mm .00005" / 0.001mm Ratchet Stop 0 - 1” / 0 - 25.4mm .00005” / 0.001mm Friction Thimble
$238.00 $253.00
Order Numbers are subject to change, e.g. 500-196-30 will change to 500-196-32
Digimatic Micrometer
† New electromagnetic ABSOLUTE sensor - Improved resistance to environmental conditions such as dirt, oil and water, which can cause false readings. † New ratchet thimble on select models improves one-hand operability. † New anti-slip finish for improved grip while taking measurements. † Long battery life – 2.4 years under normal operation. † Fully compatible with existing Mitutoyo Digimatic peripherals (SPC cables, U-WAVE wireless transmitters, DP1-VA, etc.) – SPC output-enabled IP65 models. † Function-lock system prevents inadvertent setting changes. † Certificate of Inspection provided.
293-330-30
Order No.
Range
Resolution
Remarks
List
Promo $359.00 $331.00 $352.00 $352.00 $300.00 $423.00 $380.00 $364.00 $386.00 $399.00
Data Management Software by Mitutoyo ENABLED
*with SPC Output 293-334-32* 293-335-32* 293-330-32* 293-340-32 293-344-32 293-348-32 293-349-32 293-331-32* 293-341-32 293-345-32
0-1”/0-25.4mm .00005”/0.001mm 0-1”/0-25.4mm .00005”/0.001mm 0-1”/0-25.4mm .00005”/0.001mm 0-1”/0-25.4mm .00005”/0.001mm
Ratchet Stop Ratchet Stop
$378.00 $348.00 $370.00 $370.00
Ratchet Thimble
Ratchet Thimble Friction Thimble
Ratchet thimble
Speeder
0-1”/0-25.4mm .0001”/0.001mm Ratchet Thimble, Tenths Reading $316.00
1-2”/25.4-50.8mm .00005”/0.001mm Ratchet Stop w/Standard 1-2”/25.4-50.8mm .00005”/0.001mm Ratchet Stop w/Standard
$445.00 $400.00
1-2”/25.4-50.8mm .00005”/0.001mm Ratchet Thimble w/Standard $383.00
0-1”/0-25.4mm .00005”/ 0.001mm 0-1”/0-25.4mm .00005”/0.001mm
Ratchet Thimble Friction Thimble
$406.00 $420.00
SPC cable with data switch – 1m: 05CZA662 2m: 05CZA663
U-WAVE Fit compatible
Order Numbers are subject to change, e.g. 500-196-30 will change to 500-196-32
www.dgisupply.ca
7
15% OFF with DGI Supply when you shop on-line or call!
Tool Kits
All prices are in Canadian Dollars
Soft Case Tool Kits Durable Protective Cases
New protective cases for your tools offer a modern alternative to our wooden cases. Versions include mechanical, standard Digimatic, or QuantuMike-based sets. QuantuMikes are just as accurate as standard Digimatic micrometers, but up to 4x faster. Empty cases are also available as a new home for your existing tools!
64PKA288A
RUGGED, IMPACT-RESISTANT BUILD
CASE MOULDS FOR DIGIMATIC AND MECHANICAL TOOLS
LONG-LIFE ZIPPERS AND STAIN- RESISTANT COVER
2X MAGNET-BACKED SLOTS FOR HOLDING STEEL RULES, SPANNERS, THUMB DRIVES AND MORE
Prices effective April 1 through June 30, 2026
8
Tool Kits
All prices are in Canadian Dollars
64PKA283
64PKA284
64PKA285B
Soft Case Tool Kit Components for 64PKA283
Soft Case Tool Kit Components for 64PKA284 Soft Case Tool Kit Components for 64PKA285B
Order No. Description 103-135
Order No. Description 103-177
Order No.
Description
MIC, OUTSIDE, 0-1”, 0.0001”, FRICTION THIMBLE STEEL RULE 6’’ 3R FLEXIBLE
MIC, OUTSIDE, 0-1”, 0.001”, RATCHET STOP STEEL RULE 6’’ 16R RIGID
1” RATCHET STOP MICROMETER (NO SPC) DIGIMATIC CALIPER, 6”/150MM, NO OUTPUT CASE FOR DIGIMATIC TOOL KIT
293-340-32
182-204 505-742J
182-102 505-740J
500-196-32
DIAL CALIPER, 6’’, .1”/ REV 64PMT183 CASE FOR MECHANICAL TOOL KIT
DIAL CALIPER, 6’’, .2”/ REV 64PMT183 CASE FOR MECHANICAL TOOL KIT
64PMT182
64PKA286B
64PKA288A
Soft Case Tool Kit Components for 64PKA286B
Soft Case Tool Kit Components for 64PKA288A
Order No. 293-348-32 500-196-32
Description
Order No.
Description
QUANTUMIKE MICROMETER, DIGIMATIC, 0-1”, IP65, .00005”, W/ SPC DIGIMATIC CALIPER, 6”/150MM, W/ OUTPUT
1” FRICTION THIMBLE MICROMETER (NO SPC) DIGIMATIC CALIPER, 6”/150MM, NO OUTPUT
293-180-40
500-171-30 64PMT182
64PMT182
CASE FOR DIGIMATIC TOOL KIT
CASE FOR DIGIMATIC TOOL KIT
Soft Case Tool Packages
Promo
Order No. 64PKA283 64PKA284 64PKA285B 64PKA286B 64PKA288A
Description
List
$480.00 $451.00 $654.00 $675.00 $776.00
TOOL PKG, MECHANICAL, INCH, W/ 6" DIAL CALIPER, 1" OUTSIDE MIC, 6" STEEL RULE, CASE TOOL PKG, MECHANICAL, INCH, W/ 6" DIAL CALIPER, 1" MIC, 6" STEEL RULE, CASE TOOL PKG, DIGIMATIC, INCH, W/ 1" MIC (RATCHET STOP TYPE), 6" CALIPER, CASE TOOL PKG, DIGIMATIC, INCH, W/ 1” MIC (FRICTION THIMBLE TYPE), 6” CALIPER, CASE TOOL PKG, DIGIMATIC, INCH, W/1" QUANTUMIKE, 6" CALIPER, CASE, WITH OUTPUT
$505.00 $475.00 $688.00 $710.00 $817.00
Order Numbers are subject to change, e.g. 500-196-30 will change to 500-196-32
Protective Case Only
Promo $89.00 $92.00
Order No. 64PMT182 64PMT183
Description
List
CASE FOR DIGIMATIC TOOL KIT CASE FOR MECHANICAL TOOL KIT
$94.00 $97.00
www.dgisupply.ca
9
15% OFF with DGI Supply when you shop on-line or call!
LH-600F
All prices are in Canadian Dollars
High-Accuracy Linear Height Gage LH-600F/FG The highest accuracy Linear Height Gage on the market is now even easier to use. The Mitutoyo LH-600F Linear Height Measurement System is the latest model in the Mitutoyo Linear Height Gage line, designed to be more user-friendly while maintaining the best-in-class reliability and accuracy of previous models. New Features: † Rotatable, adjustable touch screen interface. † New self-check feature. † High-accuracy encoder more resistant to contaminants. † Improved 2D mode. † Calibration date warning. † S1 Digimatic output capable of sending data directly to Excel ® , wired or wirelessly. † Additional probe and extension options. Still Featuring: † Resolution down to 0.1µinch (selectable). † Highest accuracy in its class ± (1.1+0.6L/600) µm. † Pneumatic full/semi-float system with built-in compressor.
† Capable of standard measurements such as heights and diameters or advanced measurements like angles, diagonal distances and perpendicularity (optional probes may be required). † The Origin can be set at centerline positions, peaks of radii or simply on the surface plate or gage blocks.
Perpendicular/straightness measurement - Graph creation
Show results in real time during measurement.
Show results after measurement.
Power grip model also available for even easier positioning.
You can monitor the graphs of past measurement results.
Show measurement results in graph form.
Order No.
Description
Range (Stroke)
Resolution (selectable)
Package List
Promo
HEIGHT,LINEAR, LH-600F INCH/MM, S-518 ( 02ZAA010 Power Cord Not Included ) HEIGHT, LINEAR, 24", LH-600FG ( 02ZAA010 Power Cord Not Included )
518-360-13
$13,168.00
$13,861.00
0.0001/0.001/0.01/0.1mm .0000001/.000001/.00001/.0001”
977mm (600mm) / 38” (24”)
518-361-13
$13,861.00
$14,591.00
*Must purchase Power Cord 02ZAA010
Prices effective April 1 through June 30, 2026
10
QM Height
All prices are in Canadian Dollars
† High-resolution ABSOLUTE linear encoder for position detection. † High-accuracy: ±(2.4 + 2.1L / 600)µm. ABSOLUTE 1D Height Gage QM-Height Series
GO/±NG judgment by LED (red, orange, green) and measurement examples
† Pneumatic flotation system / positioning grip allows for smooth movement along surface plate (select models). † Large, stationary display panel with user-friendly icon control keys and Go/No-go LED indicator. † Digital and USB output: Supports Mitutoyo wireless SPC output. † Fully compatible with existing Mitutoyo Digimatic peripherals (SPC cables, U-WAVE wireless transmitters, multiplexers, etc.). † Battery life of 1200 hours in continuous use with four AA batteries, an improvement from 300 hours.
d2 Digimatic and USB outputs
To install U-WAVE-T , separately purchase the optional mounting plate ( 02AZE990 ).
64PKA129C
Order No.
Range
Resolution
Remarks
List
Promo
64PKA094C
$5,821.60
0 - 14”/ 0 - 350mm
$6,128.00
0.001mm / 0.0005mm /.00005” / .0001” (selectable)
64PKA095C
$6,549.30
0 - 24”/ 0 - 600mm
$6,894.00
64PKA129C
$6,549.30
0 - 14”/ 0 - 350mm
$6,894.00
Pneumatic Flotation System
64PKA130C
$7,254.20
0 - 24”/ 0 - 600mm
$7,636.00
† Durable Build - Iron detector and base, steel beam and holder. † Easy to use slider feed wheel. † Multiple data equipment options. † Other improvements: twist-off battery cap, 20% larger LCD, handy Data button. Popular Mitutoyo single-beam height gages have been redesigned to be even easier to use with larger displays, various hardware accessories, and multiple data options such as wired and wireless output, data loggers and more. ABSOLUTE Digimatic Height Gages Features:
Shown with optional Test Indicator and mounting hardware (see page 9).
Shown with optional U-Wave Bluetooth ® transmitter (see page 28 and connector 02AZD790F)
570-412
Data Management Software by Mitutoyo ENABLED
Data Output
Max. response speed
Order No.
Range
Resolution
Functions
Drive Method
Battery Life List
Promo
570-412 570-413 570-414
$1,035.00
0"-12"/0mm-300mm 0"-18"/0mm-450mm 0"-24"/0mm-600mm
On/Off, Origin, Zero/ABS, Hold/ Data, inch/mm conversion"
$1,150.00
Approx. 5 Years Under Normal Use
Slider-feed Wheel (manual)
Digimatic d1
$1,544.00 $1,390.00
0.0005" / 0/01mm
Unlimited
$1,608.00
$1,787.00
www.dgisupply.ca
11
15% OFF with DGI Supply when you shop on-line or call!
Dial Indicators / Bore Gages
All prices are in Canadian Dollars
Series Two Dial Indicators
† Improved impact, and oil-resistant materials are employed in the bezel. The improved shape of the crystal face helps with easier measurement readings. † High-strength, heat-treated stainless steel spindles for longevity. † Scratch, and chemical-resistant hard-coated crystals. † Increased rigidity in the bearing plate for reducing the retracing error (20%), and 4-screw mounting for greater impact resistance. † Inspection certificate included. † No through screw-holes on the frame for high oil, and dust-resistance. The bezel clamp (optional) can be attached either to the right or left side.
2803A-10
Revolutionary stem-bushing design for trouble-free stem clamping (longer clamping range; maximum tightening torque at the clamping point with M5 screw: 150N•cm).
2424A-19
Accuracy First 2.5 Rev/Overall
Order No.
Graduation Range Range/Rev
Type Dial Reading
Force
List
Promo
2358A-10* 2803A-10* 2416A-10* 2424A-19*
$331.00 $240.00 $212.00 $364.00 $213.00
.0001” .0001”
.5”
.01" .01"
w/lug w/lug w/lug w/lug w/lug
0-10
.0001 / .0008 2.0N or less $348.00
.025”
0-5-0 0-100 0-100
.0001 / .0001 2.5N or less
$253.00
.001” .001”
1” 2” 1”
.1" 1"
.001 / .002 1.8N or less $223.00 .001 / .003 2.5N or less $383.00
2776A
.0005”
.05"
0-50
.0005 / .002 2.5N or less
$224.00
*Jeweled bearing model
Bore Gages
† Carbide-tipped contact points for durability. † The dial indicator is fully protected by a rugged cover. † Optional extension rods can be attached for measuring deep holes. † The grip minimizes the variation of measurements by reducing heat transfer from the operator’s hand.
511-751-20
Order No.
Range Graduation
Anvils
Spacers
List
Promo
With Indicator 511-751-20
$618.00 $600.00 $657.00 $867.00 $979.00 $1,167.00 $392.00 $402.00 $434.00 $649.00 $761.00 $956.00
.7 - 1.4” 1.4 - 2.5” 2.0 - 6.0” 4.0 - 6.5” 6.5 - 10” 10 - 16” .7 - 1.4” 1.4 - 2.5” 2.0 - 6.0” 4.0 - 6.5” 6.5 - 10” 10 - 16”
9 6
2 4 4 4
$651.00 $632.00 $692.00 $913.00
511-752-20 511-753-20 511-754-20 511-755-20 511-756-20
11 (2" sub anvil)
.0001” (2923B-10)
13
6
7 $1,031.00 7 $1,228.00
5 (3" sub anvil)
Without Indicator 511-731
9 6
2 4 4 4 7
$413.00 $423.00 $457.00 $683.00 $801.00
511-732 511-733 511-734 511-735 511-736
See Digimatic indicators made specifically for bore gages (page 10).
Indicator optional Protective Cover optional (21DZA000)
11 (2" sub anvil)
13
6
5 (3" sub anvil)
7 $1,006.00
Prices effective April 1 through June 30, 2026
12
Dial Test Indicators
15% OFF with DGI Supply when you shop on-line or call!
All prices are in Canadian Dollars
Dial Test Indicators
† One-piece movement assembly for improved durability & impact resistance. † Contact point length shown on dial face. † Certificate of Inspection included. † Shows results from both measuring directions. † Resilient crystal with high resistance to glare, scratches and impact. .000050” / 50µinch model now available!
Contact point length is printed on dial face to avoid accuracy issues
513-404-10E
Standard
Set Configuration
OrderNo.
Range
Graduations
Set Type Face Color
List
Promo Remarks
Inch
Standard
Full set
T set
513-407-10E 513-407-10T 513-401-10E 513-402-10E 513-402-10T 513-403-10E 513-403-10T 513-404-10E 513-404-10A 513-404-10T 513-405-10E 513-405-10T 513-406-10E 513-406-10T 513-409-10E 513-409-10T 513-412-10E 513-412-10T 513-415-10E 513-415-10H
$279.00 Fine grads $328.00 Fine grads
.008” .008”
.00005” .00005” 0.001mm
Basic
White $294.00 White $345.00 Yellow $350.00 White $204.00 White $243.00 White $266.00 White $312.00 Yellow $208.00 Yellow $229.00 Yellow $244.00 Yellow $231.00 Yellow $303.00 White/Yellow $241.00 White/Yellow $266.00 Yellow/White $310.00 Yellow/White $315.00 White $294.00 White $339.00 Yellow $221.00 Yellow $242.00
Stem, .157" DIA. ( 21CAB106 )
Contact point, .118" DIA. carbide
Contact point, .039" DIA. carbide
Full
$333.00 $194.00 $231.00 $253.00 $296.00 $198.00 $218.00 $232.00 $219.00 $288.00 $229.00 $253.00 $295.00 $299.00 $279.00 $322.00 $210.00 $230.00
.14mm
Basic Basic
.03" .03"
.0005" .0005" .0001" .0001"
Full
.008" .008"
Basic
Swivel clamp ( 900322 , for .157" DIA., 3/8" DIA., dovetail)
Inch holding bar (L: 4") (900306)
Full
0.8mm 0.8mm 0.8mm 0.2mm 0.2mm
0.01mm 0.01mm 0.01mm 0.002mm 0.002mm
Basic
Plus Full
Basic set
Basic
Full
E, A set
Contact point, .079" DIA. (Carbide)
.03”/0.7mm .03”/0.7mm
.0005”/0.01mm Basic .0005”/0.01mm Full
Dual dial Dual dial Dual dial Dual dial
0.2mm/.0076" 0.002mm/.0001” Basic 0.2mm/.0076" 0.002mm/.0001” Full
Indicator
Knurled clamp ring
.03" .03"
.0005" .0005" 0.01mm 0.01mm
Basic
Full
Stem, .157" DIA. ( 21CAB106 )
Stem, 3/8" DIA.
1.0mm 1.0mm
Basic Basic
Long stylus Long stylus
Ruby Tip
Metric
513-472-10E 513-479-10E
$218.00 $230.00
.03" .03"
.0005" .0005"
Basic Basic
White $229.00 White $242.00
Full set
Long stylus
T set
Standard (20° tilted face)
Swivel clamp ( 900321 , for ø4mm, ø8mm, dovetail)
Metric holding bar (L: 100mm) (900209)
513-442-10A 513-442-10T 513-442-16A 513-442-16T 513-446-16A 513-446-16T 513-446-10A 513-446-10T 513-443-10A 513-443-10T
$264.00 $299.00 $264.00 $299.00 $353.70 $397.00 $353.00 $397.00 $333.00 $376.00
.06" .06" .06” .06” .06" .06" .06” .06”
.0005" .0005" .0005” .0005” .0005" .0005" .0005” .0005” .0001” .0001”
Basic
White $278.00 White $315.00
Full
Basic
Black Black Black Black
$278.00 $315.00 $372.00 $418.00
Plus set
A set C set (ø 6 Stem)
Full
Basic
Contact point, ø3mm carbide
Long stylus Long stylus Long stylus Long stylus
Stem, ø4mm (21CAB106)
Contact point, ø1mm carbide
Full
Basic
White $372.00 White $418.00 White $350.00 White $396.00
Full
Basic set
.016” .016”
Basic
Full
E set
Contact point, ø2mm (Carbide)
Vertical: dial is on the top of the frame
513-452-10E 513-452-10T 513-453-10E
$253.00 $279.00 $301.00
.03" .03"
.0005" .0005" .0001”
Basic
White $266.00 White $294.00 White $317.00
Indicator
Full
.008”
Basic
H set (ø 6 Stem)
Parallel: dial is on the side of the frame
Knurled clamp ring
(Set No. 902804 ) Stem, ø8mm
513-485-10E
$322.00
0.2mm
0.002mm
Basic
Yellow $339.00
www.dgisupply.ca
13
Indicators
Watch how MeasurLink ® 10.4 can control gages with S1 output!
All prices are in Canadian Dollars
ID-C / ID-F Digimatic Indicators High-performance ABS Digimatic Indicators
Calibration period notification function
†20 µinch/0.5 µm resolution. †Large screen and analog bar. †Calibration period notification
0.5” ID-F MODEL NOW AVAILABLE
function. The LCD displays an icon to notify the user when the set calibration time approaches. This facilitates the proper precision management of ID-C/ID-F. †Simple Calculation Function.
ID-C Series
ID-F Series
†New Digimatic S1 Output*. S1 is the new Mitutoyo bidirectional output format that enables reading and writing information to the gages such as sending a zero command, TIR reset, calibration date warnings, and the ability to poll the serial
Large screen and analog bar The units have large screens that can display various information in an easy-to-read manner. They also have an analog bar, convenient for observing subtle movements such as the approach to tolerance.
number for smoother measurement operation. Communication is supported by the new Input Tool and SPC cable, see table below.
Order No. 06AGL011
Description
List
SPC DIGIMATIC Cable, TYPE S1 (1M)
$142.00 $303.00
Previous model
New model
Addition of analog bar
264-020
USB INPUT TOOL
* SPC Cable and Input Tool are both required
Excel ® Send data directly into existing forms ITPak 3.0 Freeware
ID-C
ID-C
Improved analog bar
Read/Write Data and set Parameters MeasurLink ® 10.4
Character size enlarged about 1.5 times
06AGL011
264-020
(see page 29) Data Management & SPC Software
ID-F
ID-F
ID-C Series - Battery Operated
Order No.
Maximum Permissible Error
Net mass (g)
Measuring for MPL (N)
Range
Resolution
Interface
List
Promo
With Lug
Flat Back
Hysteresis MPE H
Repeatability MPE R
With Lug
Flat Back
MPE E
543-702-02 543-702B-02 543-707-02 543-707B-02
$637.00 $995.00 $855.00
0.5" / 12.7mm 0.5" / 12.7mm 1" / 25.4mm
1.5 or less d1/d2/S1 195 165 $670.00 0.4 to 0.7 d1/d2/S1 190 160 $1,047.00
± 0.00012" / 0.002mm 0.00008" / 0.002mm
0.00002" / .00005" / 0.0001" / 0.0005" / 0.0005mm / 0.001mm / 0.01mm
0.00008" / 0.002mm
-
543-722B-02
1.8 or less d1/d2/S1 -
195 $900.00
± 0.0002" / 0.005mm
-
543-732B-02
$1,067.00
2" / 50.8mm
2.3 or less d1/d2/S1 -
260 $1,123.00
543-712-02 543-712B-02 543-717-02 543-717B-02
$466.00 $746.00 $683.00
0.5" / 12.7mm 0.5" / 12.7mm 1" / 25.4mm
0.9 or less
d1/S1 190 160 $490.00
± 0.001" / 0.02mm 0.001" / 0.02mm
0.2 to 0.5 d1/S1 185 155 $785.00
0.0005" / 0.01mm
0.0005" / 0.01mm
-
543-727B-02
1.8 or less
d1/S1
-
190 $719.00
± 0.0015" / 0.04mm
-
543-737B-02
$894.00
2" / 50.8mm
2.3 or less
d1/S1
-
245 $941.00
ID-F Series - AC Powered - Green/Red Backlit Display Order Numbers are subject to change, e.g. 500-196-30 will change to 500-196-32
Order No.
Maximum Permissible Error
Measuring for MPL (N)
Range
Resolution
Interface List
Promo
Hysteresis MPE H
Repeatability MPE R
With Lug Flat Back
MPE E
543-856-A 543-856B-A 0.5” / 12.7mm
$858.00
1.5 or less d1/d2/S1 $903.00
0.005mm / 0.001mm / 0.01 mm / 0.00002" / .00005" / 0.0001" / 0.0005"/ 0.001" (selectable)
± 0.0001" / 0.0025mm
- - -
543-852A 543-854A 543-858A
1.8 or less d1/d2/S1 $1,053.00 $1,000.00
1" / 25.4mm
0.00008" / 0.002mm
0.00008" / 0.002mm
$1,135.00 $1,155.00
± 0.00016" / 0.004mm ± 0.00012" / 0.003mm
2.3 or less d1/d2/S1 $1,195.00 2.3 or less d1/d2/S1 $1,216.00
2" / 50.8mm
Prices effective April 1 through June 30, 2026
14
Indicators
All prices are in Canadian Dollars
Digimatic Indicator ID-H Remote Programming Capable
21EZA099 Remote controller (optional)
† This digital indicator offers excellent accuracy and functionality with an easy-to-read display. Take advantage of its high accuracy, backed up by 0.5µm / .00002” resolution, remote control functionality via a handheld controller (or an RS- 232C interface) and easy runout measurements
† The maximum, minimum or runout value can be displayed during measurement. † Go/No-go judgment is performed by setting the upper and lower tolerances. If a judgment result is out of tolerance, the display backlighting changes from green to red, so tolerance judgment can be made at a glance.
with the analog bar display. † With RS-232C input/output
543-564A
Stem dia. 3/8" #4-48 UNF Thread
Order No. 543-562A 543-564A
Resolution
Range
Model
Accuracy
List
Promo
$1,317.00 $1,571.00
1.2” / 30.4mm ID-H530E 0.0015mm $1,386.00 2.4” / 60.9mm ID-H560E 0.0025mm $1,654.00
.00002”, .00005”, .0001”, 0.0005mm, 0.001mm
Data Management Software by Mitutoyo ENABLED
SPC cable – 1m: 936937 2m: 965014
ABSOLUTE Digimatic Indicator ID-S † Employing the ABSOLUTE linear encoder, the ID-S always displays the spindle ABSOLUTE Position from the origin at power-on. Also, unlimited response speed eliminates overspeed errors. † Dust/water protection level: IP42 (IP53: 543-796B-10). † SPC data output
543-783B-10
Data Management Software by Mitutoyo ENABLED
Order No.
Resolution
Range
Accuracy
Measuring force
Remarks
List
Promo
Stem dia. 3/8", #4-48 UNF Thread 543-792-12
$422.00 $453.00 $422.00 $266.00 $422.00 $453.00 $422.00
.00005”/0.001mm .00005”/0.001mm .0001”/0.001mm .0005”/0.01mm .00005”/0.001mm .00005”/0.001mm .00005”/0.001mm
.5” / 12.7mm .5” / 12.7mm .5” / 12.7mm .5” / 12.7mm .5” / 12.7mm .5” / 12.7mm .5” / 12.7mm
±.0001” ±.0001” ±.0001” ±.0010” ±.0001” ±.0001” ±.0001”
1.5N or less 2.5N or less 1.5N or less 1.5N or less 1.5N or less 2.5N or less 1.5N or less
w/ lug back w/ lug-back w/ lug back w/ lug-back w/ flat back w/ flat-back w/ flat back
$444.00 $477.00 $444.00 $280.00 $444.00 $477.00 $444.00
543-796-12 543-793-12 543-783-12 543-792B-12 543-796B-12 543-793B-12
ABSOLUTE Digimatic Indicator ID-U † Economical, slim digital indicator. † Large LCD and simple key operation.
† Ideal for installation into measuring devices because of its compact design and long battery life. † Employing the ABSOLUTE linear encoder, the ID-U always displays the spindle ABSOLUTE position from the origin at power-on. Also, unlimited response speed eliminates overspeed errors. † Long stem for mounting.
575-123
Data Management Software by Mitutoyo ENABLED
Order No.
Resolution
Range
Model
Accuracy Measuring force
List
Promo
575-123
$293.00
.0005”/0.01mm 1” / 25.4mm ID-U1025E .0008”
1.8N or less
$308.00
SPC cable – 1m: 905338 2m: 905409
www.dgisupply.ca
15
15% OFF with DGI Supply when you shop on-line or call!
Specialized Indicators
All prices are in Canadian Dollars
Calculation-Type Digimatic Indicator ID-C † Calculation-type Digimatic Indicator features both a key lock and parameter lock. † Fast measurement frequency up to 50 per second.
† Improved parameter setting software makes it even easier to set all of the available parameters to determine and upload the proper coefficients for calculation. (optional) 21EZA313
† An analog bar provides easy-to-read values when scanning for Max, Min and TIR Values. † The ABSOLUTE Digimatic indicator performs internal calculations using the formula Ax+B+Cx-1 (assuming spindle displacement as x), while the specified coefficients A, B and C can be set with respect to the purpose of measurement or dimensions of the fixtures. This unique feature allows for reading measurements directly without searching for conversions.
543-342B-10
Data Management Software by Mitutoyo ENABLED
Custom fixture shown
Order No.
Resolution
Range
Accuracy
Measuring Force List
Promo
.00005/.0001/.0005” (0.001/0.01mm) Selectable
543-342B-10
$665.00
.5"/12.7mm ±.00010"/0.003mm 1.5N or less
$700.00
SPC cable – 1m: 905338 2m: 905409
Stem dia. 3/8" #4-48 UNF Thread
Bore Gage ABSOLUTE Digimatic Indicator ID-C
† Hold automatically picks up hole diameter after a sweep. † Bore Gage Digimatic Indicator features both a key lock and parameter lock. † Fast measurement frequency up to 50 per second. † Analog bar provides easy-to-read values when scanning for Max, Min and TIR values. † Up to three sets of master values and upper/lower tolerance values can be stored.
† Go/No-go judgment † Employing the ABSOLUTE linear encoder, the ID-C always displays the spindle ABSOLUTE Position from the origin at power-on. † Improved parameter setting software makes it even easier to set all of the available parameters to determine and upload the proper coefficients for calculation. (optional) 21EZA313
543-312B-10
Data Management Software by Mitutoyo ENABLED
Measuring Force
Installed on optional bore gage probe (page 12)
Order No.
Resolution
Range
Accuracy
List
Promo
.00005/.0001/.0005” (0.001/0.01mm) Selectable
543-312B-10
$665.00
.5"/12.7mm ±.00010"/0.003mm 1.5N or less
$700.00
SPC cable – 1m: 905338 2m: 905409
Peak Hold ABSOLUTE Digimatic Indicator ID-C With Max./Min. Value Holding Function † Peak Hold Digimatic Indicator features both a Key Lock and Parameter Lock. † An analog bar provides easy-to-read values when scanning for Max, Min and TIR Values. † Go/No-go judgment † The maximum, minimum or runout value can be displayed during measurement.
† Fast measurement frequency up to 50 per second. † Employing the ABSOLUTE linear encoder, the Signal ID-C always displays the spindle ABSOLUTE Position from the origin at power-on. † Improved parameter setting software makes it even easier to set all of the available parameters and then determine and upload the proper coefficients for calculation. (optional) 21EZA313
543-302B-10
Order No.
Resolution
Range
Accuracy
Remarks
List
Promo
Stem dia. 3/8", #4-48 UNF Thread 543-302-10
.00005/.0001/.0005" 0.001/0.01mm Selectable
$665.00
.5"/12.7mm ±.00010"/0.003mm w/lug
$700.00
543-302B-10
$665.00
.5"/12.7mm ±.00010"/0.003mm Flat-back
$700.00
Data Management Software by Mitutoyo ENABLED
SPC cable – 1m: 905338 2m: 905409
Prices effective April 1 through June 30, 2026
16
Borematic
All prices are in Canadian Dollars
Borematic Quick, spring-loaded lever action/movement
10% OFF
† Titanium-coated measuring pins provide excellent durability and impact resistance while allowing the instrument to measure close to the bottom of blind holes. † Digital display with quick-action lever operation enables quick and easy measurement. † Built-in ABSOLUTE System eliminates the need to set the origin point every time the unit is turned on. The system is immune to over-speed errors, thus increasing the reliability of measurement. † The Digimatic Borematic is compatible with statistical process control systems and measurement support systems. † Built-in tolerance judgment function allows Go/No-go judgment based on user-defined upper and lower limit settings.
Data Management Software by Mitutoyo ENABLED
Individual Gages: includes one digital display unit and one interchangeable measuring head (plus adapter if required)
Order No.
Size Range
Accuracy
Extension Rod
List
Promo
$1,839.00 $2,022.00 $2,003.00 $1,877.00 $2,047.00 $2,047.00 $1,940.00 $2,331.00 $2,331.00 $2,287.00 $2,181.00 $2,408.00 $2,219.00 $2,320.00 $2,447.00
568-461 568-462 568-463 568-464 568-465 568-466 568-467 568-468 568-469 568-470 568-471 568-472 568-473 568-474 568-475
$2,043.00 $2,247.00 $2,225.00 $2,085.00 $2,274.00 $2,274.00 $2,156.00 $2,590.00 $2,590.00 $2,541.00 $2,423.00 $2,675.00 $2,465.00 $2,578.00 $2,719.00
0.275” - 0.350” 0.350” - 0.425” 0.425” - 0.500” 0.50” - 0.65” 0.65” - 0.80”
±5µm ±0.00025 in
100mm ( 952322 )
Technical Data Resolution: 0.001mm or
0.00005in/0.001mm
±5µm ±0.00025 in
150mm ( 952621 )
Display: Response speed: Battery:
LCD
0.8” - 1.0” 1.0” - 1.2” 1.2” - 1.6” 1.6” - 2.0” 2.0” - 2.5” 2.5” - 3.0” 3.0” - 3.5” 3.5” - 4.0” 4.0” - 4.5” 4.5” - 5.0”
Inf inite
SR44 (1 pc), 938882 , for initial operational checks (standard accessory) Battery life: Approx. 5,000 hours in continuous use Scale type: Electrostatic capacitance ABSOLUTE encoder Functions Go/No-go judgment, Go/No-go judgment zoom, 2-Point preset, Zero-setting, Data hold, Error alarm, Low battery voltage alert, Data output, Function lock, 330° Rotary display, inch/mm conversion (inch/mm models)
150mm ( 952622 )
±6µm ±0.0003 in
150mm ( 952623 )
Complete Unit Gage Sets: includes several individual gages to cover the overall size range of the set
Order No.
Overall Range Range of Individual Gages
Setting Rings
List
Promo
568-966 568-967 568-968 568-969
$6,631.00 $6,923.00 $4,957.00 $5,986.00
0.5” - 1”
0.5-0.65”, 0.65-0.8”, 0.8-1”
0.65” DIA., 0.8” DIA. 1.2” DIA., 1.6” DIA.
$7,368.00 $7,692.00 $5,508.00 $6,651.00
1” - 2” 2” - 3” 3” - 4”
1-1.2”, 1.2-1.6”, 1.6-2”
2-2.5”, 2.5-3” 3-3.5”, 3.5-4”
2.5” DIA. 3.5” DIA.
Complete-Unit Set
Interchangeable-Head Sets
Order No.
Overall Range Range of Individual Gages
Setting Rings
List
Promo
568-928 568-929 568-930 568-936
$3,086.00 $3,208.00 $4,257.00 $5,629.00
0.275” - 0.5”
0.275-0.35”, 0.35-0.425”, 0.425-0.5” 0.35” DIA., 0.425” DIA.
$3,429.00 $3,564.00 $4,730.00 $6,254.00
0.5” - 1”
0.5-0.65”, 0.65-0.8”, 0.8-1”
0.65” DIA., 0.8” DIA. 1.2” DIA., 1.6” DIA. 2.5” DIA., 3.5” DIA.
1” - 2” 2” - 4”
1-1.2”, 1.2-1.6”, 1.6-2”
2-2.5”, 2.5-3”, 3-3.5”, 3.5-4”
Interchangeable-Head Set
Includes one digital display unit with several interchangeable measuring heads (and adapters as required) to cover the total size range plus one extension rod
Order Numbers are subject to change, e.g. 500-196-30 will change to 500-196-32
www.dgisupply.ca
17
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40Powered by FlippingBook