TURNING INSERTS | POSITIVE RAKE
CCGX-AL
Precision Ground, High Positive, polished 80° diamond inserts for turning, boring and facing of Aluminum, non-ferrous materials and non-metallics. AL: Extremely high 25° positive rake geometry. Super sharp edgeline with polished face for smooth chip flow.
d
7°
r
s
l
CUTTING DATA (INCH)
DIMENSIONS (INCH)
NON-FERROUS
ANSI DESIGNATION
ISO DESIGNATION
feed per rev, f n
d l
s
r depth of cut, a p
N425
NA425
CCGX 2(1.5)0.5-AL
CCGX 060202-AL 1/4 .254 3/32 .008 .010 - .047 .002 - .008
DPL100008 DPL100009
CCGX 2(1.5)1-AL
CCGX 060204-AL 1/4 .254 3/32 1/64 .016 - .062 .004 - .010
DPL100010 DPL100011
CCGX 2(1.5)2-AL
CCGX 060208-AL 1/4 .254 3/32 1/32 .020 - .062 .006 - .020
DPL100012 DPL100013
CCGX 3(2.5)0.5-AL
CCGX 09T302-AL 3/8 .381 5/32 .008 .010 - .094 .002 - .008
DPL100014 DPL100015
CCGX 3(2.5)1-AL
CCGX 09T304-AL 3/8 .381 5/32 1/64 .016 - .125 .004 - .010
DPL100016 DPL100017
CCGX 3(2.5)2-AL
CCGX 09T308-AL 3/8 .381 5/32 1/32 .020 - .125 .006 - .020
DPL100018 DPL100019
CCGX 430.5-AL
CCGX 120402-AL 1/2 .508 3/16 .008 .010 - .125 .002 - .008
DPL100020 DPL100021
CCGX 431-AL
CCGX 120404-AL 1/2 .508 3/16 1/64 .016 - .187 .004 - .010
DPL100022 DPL100023
CCGX 432-AL
CCGX 120408-AL 1/2 .508 3/16 1/32 .020 - .187 .006 - .020
DPL100024 DPL100025
Ordering Example: 20 pcs CCGX 432-AL N425; DPL100024
REFERENCE PAGES
5
38 TECHNICAL INFORMATION
63
CUTTING SPEED RECOMMENDATIONS
GRADE SELECTION
58
Powered by FlippingBook