TURNING INSERTS | POSITIVE RAKE
DCMT-GP
55° diamond inserts for profile turning and finishing. Positive rake screw-down inserts. Good choice for small diameter and slender workpieces. GP: All-round positive rake geometry. Wide application area. Excellent for boring in most materials.
d
7º
r
s
l
CUTTING DATA (INCH)
DIMENSIONS (INCH)
STEEL
ANSI DESIGNATION
ISO DESIGNATION
feed per rev, f n
d l
s
r depth of cut, a p
P125
P105
P115
DCMT 2(1.5)1-GP
DCMT 070204-GP 1/4 .305 3/32 1/64 .020 - .047 .003 - .008
DPL100203
-
-
DCMT 2(1.5)2-GP
DCMT 070208-GP 1/4 .305 3/32 1/32 .031 - .062 .004 - .010
DPL100210
-
-
DCMT 3(2.5)0.5-GP
DCMT 11T302-GP 3/8 .458 5/32 .008 .010 - .031 .003 - .006
DPL100212
-
-
DCMT 3(2.5)1-GP
DCMT 11T304-GP 3/8 .458 5/32 1/64 .020 - .062 .004 - .008
DPL100218
-
-
DCMT 3(2.5)2-GP
DCMT 11T308-GP 3/8 .458 5/32 1/32 .031 - .080 .005 - .010
DPL100227
-
-
DCMT 431-GP
DCMT 150404-GP 1/2 .610 3/16 1/64 .020 - .062 .004 - .008
DPL100236
-
-
DCMT 432-GP
DCMT 150408-GP 1/2 .610 3/16 1/32 .031 - .080 .005 - .010
DPL100238
-
-
DCMT 433-GP
DCMT 150412-GP 1/2 .610 3/16 3/64 .047 - .125 .006 - .010
DPL100240
-
-
Ordering Example: 20 pcs DCMT 433-GP P125; DPL100240
REFERENCE PAGES
5
38 TECHNICAL INFORMATION
63
CUTTING SPEED RECOMMENDATIONS
GRADE SELECTION
46
Powered by FlippingBook