TURNING INSERTS | POSITIVE RAKE
DCGT-GP
55° diamond inserts for profile turning and finishing. Precision tolerance, positive rake screw-down inserts. Good choice for small diameter and slender workpieces. GP: All-round positive rake geometry. Wide application area. Excellent for boring in most materials.
d
7º
r
s
l
CUTTING DATA (INCH)
DIMENSIONS (INCH)
STEEL
ANSI DESIGNATION
ISO DESIGNATION
feed per rev, f n
d l
s
r depth of cut, a p
G625
DCGT 2(1.5)0.5-GP
DCGT 070202-GP 1/4 .305 3/32 .008 .010 - .031 .003 - .006
DPL100180
DCGT 2(1.5)1-GP
DCGT 070204-GP 1/4 .305 3/32 1/64 .020 - .047 .003 - .008
DPL100181
DCGT 2(1.5)2-GP
DCGT 070208-GP 1/4 .305 3/32 1/32 .031 - .062 .004 - .010
DPL100182
DCGT 3(2.5)0.5-GP
DCGT 11T302-GP 3/8 .458 5/32 .008 .010 - .031 .003 - .006
DPL100183
DCGT 3(2.5)1-GP
DCGT 11T304-GP 3/8 .458 5/32 1/64 .020 - .062 .004 - .008
DPL100184
DCGT 3(2.5)2-GP
DCGT 11T308-GP 3/8 .458 5/32 1/32 .031 - .080 .005 - .010
DPL100185
Ordering Example: 20 pcs DCGT 3(2.5)2-GP G625; DPL100185 NOTE: The primary application area for grade G625 is in steel workpiece materials. G625 is also suitable for use with stainless steel and cast iron components.
DCMT-KM
55° diamond inserts for profile turning and finishing. Positive rake screw-down inserts. Good choice for small diameter and slender workpieces. KM: Positive rake roughing geometry. Strong cutting edge with high fracture resistance. Excellent performance in steels and cast iron.
d
7º
r
s
l
CUTTING DATA (INCH)
DIMENSIONS (INCH)
STEEL
CAST IRON
ANSI DESIGNATION
ISO DESIGNATION
depth of cut, a p
feed per rev, f n
d l
s
r
P125
K315
DCMT 3(2.5)1-KM
DCMT 11T304-KM 3/8 .458 5/32 1/64 .040 - .094 .006 - .012
DPL100220 DPL100219
DCMT 3(2.5)2-KM
DCMT 11T308-KM 3/8 .458 5/32 1/32 .040 - .109 .007 - .014
DPL100229 DPL100228
Ordering Example: 20 pcs DCMT 3(2.5)2-KM P125; DPL100229
REFERENCE PAGES
5
38 TECHNICAL INFORMATION
63
CUTTING SPEED RECOMMENDATIONS
GRADE SELECTION
48
Powered by FlippingBook