TURNING INSERTS | POSITIVE RAKE
DCMT-MM
55° diamond inserts for profile turning and finishing. Positive rake screw- down inserts. Good choice for small diameter and slender workpieces. MM: Ultra-sharp cutting edge geometry for finishing and semi-finishing operations. Low cutting forces and superior workpiece surface finish.
d
7º
r
s
l
CUTTING DATA (INCH)
DIMENSIONS (INCH)
STEEL
ANSI DESIGNATION
ISO DESIGNATION
feed per rev, f n
d l
s
r depth of cut, a p
P105
P115
P125
DCMT 2(1.5)0.5-MM DCMT 070202 - MM
1/4 .305 3/32 .008 .004 - .031 .002 - .005
-
DPL100199 DPL100200
DCMT 2(1.5)1-MM
DCMT 070204- MM
1/4 .305 3/32 1/64 .004 - .047 .002 - .006
DPL100205 DPL100206 DPL100207
DCMT 3(2.5)0.5-MM
DCMT 11T302- MM
3/8 .458 5/32 .008 .004 - .031 .002 - .005
-
DPL100214 DPL100215
DCMT 3(2.5)1-MM
DCMT 11T304- MM
3/8 .458 5/32 1/64 .004 - .062 .002 - .006
DPL100222 DPL100223 DPL100224
DCMT 3(2.5)2-MM
DCMT 11T308- MM
3/8 .458 5/32 1/32 .004 - .062 .003 - .008
DPL100231 DPL100232 DPL100233
Ordering Example: 20 pcs DCMT 2(1.5)0.5-MM P125; DPL100200
DCMT-MM
55° diamond inserts for profile turning and finishing. Positive rake screw- down inserts. Good choice for small diameter and slender workpieces. MM: Ultra-sharp cutting edge geometry for finishing and semi-finishing operations. Low cutting forces and superior workpiece surface finish.
d
7º
r
s
l
CUTTING DATA (INCH)
DIMENSIONS (INCH)
M S
M
ANSI DESIGNATION
ISO DESIGNATION
MULTI-MATERIAL S515
feed per rev, f n
d l
s
r depth of cut, a p
M225
DCMT 2(1.5)0.5-MM DCMT 070202 - MM
1/4 .305 3/32 .008 .004 - .031 .002 - .005
DPL100201
DPL100132
DCMT 2(1.5)1-MM
DCMT 070204- MM
1/4 .305 3/32 1/64 .004 - .047 .002 - .006
DPL100208
DPL100133
DCMT 3(2.5)0.5-MM
DCMT 11T302- MM
3/8 .458 5/32 .008 .004 - .031 .002 - .005
DPL100216
DPL100143
DCMT 3(2.5)1-MM
DCMT 11T304- MM
3/8 .458 5/32 1/64 .004 - .062 .002 - .006
DPL100225
DPL100144
DCMT 3(2.5)2-MM
DCMT 11T308- MM
3/8 .458 5/32 1/32 .004 - .062 .003 - .008
DPL100234
DPL100149
Ordering Example: 20 pcs DCMT 3(2.5)2-MM S515; DPL100234 NOTE: The primary application area for grade S515 is in stainless steel workpiece materials. S515 is also suitable for use with iron- based, cobalt-based and nickel-based Heat Resistant Super Alloys.
REFERENCE PAGES
5
38 TECHNICAL INFORMATION
63
CUTTING SPEED RECOMMENDATIONS
GRADE SELECTION
45
Powered by FlippingBook