COMBINATION MILLING MACHINES
HORIZONTAL/ VERTICAL This is a combination horizontal/vertical milling ma- chine that combines outstanding versatility with heavy metal removal rates. It uses a single swivel head for milling in a plane from 0° to 150°. Conversion from vertical to horizontal models is quick and easy. Just retract the forearm, loosen four bolts on the head and rotate the head. This machine is built of heavy, stabil- ized pearlitic castings ribbed for strength. An outboard knee support is provided for table stability. Gears are of chrome-nickel steel, hardened. ground and encased in an oil bath. Controls are grouped for easy access.
STANDARD EQUIPMENT FVH-205
Horizontal to vertical head; table longitudinal and cross and knee power feed; coolant sys- tem; one-shot lubrication system; arbor sup- port and knee-mounted overarm support.
FVH-205 in vertical mode
Extra-large table-A full 12 x 52-3/4 in. power feed for table saddle and knee are standards.
The FVH-205 has a 2-speed, elec- trically reversible 5/8 hp spindle drive motor, provldl ng 2 speed ranges.
Easy to operate controls for the FVH-205 mill are mounted at the front for easy access and operator convenience.
Conversion from vertical to horizon- tal mode Is rapid, with easy-to-mount overarm outboard support.
KNEE TRAVEL
TABLE
SPINDLE SPEEDS
BASE MACHINE FLOOR AREA
NET
TABLE TRAVEL
MODEL
SIZE
CROSS
SPINDLE
LONG.
NO.
RANGE
WEIGHT
mm
mm
mm
mm
in.
in.
in.
hp
mm
in.
in.
kw
rpm 40-
kg
lb.
FV-205 12 X
305x 5& 3.7 & 31 -1/ 2 800
15-3/4 400
17-5/8 450 18
1170x 5500
46x
2500
52-3/4 1345 8
600
5.9
1500
26
13-32
ASK FOR DETAILED PRODUCT LITERATURE
Powered by FlippingBook