COATED AND NON-WOVEN ABRASIVES Non-Woven Wheels
Made from non-woven synthetic fiber mesh, which is impregnated with abrasives and bound with resins, non-woven wheels are designed to create desired surface finish where little or no stock removal is required. The industry's broadest offering is available for light stock removal, deburring, blending, finishing and polishing. Non-woven wheels have an open mesh construction that is waterproof, washable, conformable and non-loading. Applications: Cleaning and removing imperfections on metal surfaces, cleaning built-up residue, deburring or finishing a variety of surfaces, blending weld seams or creating decorative finishes. Non-woven surface finishing products have excellent versatility.
Abrasive Grain:
Ceramic Alumina, Engineered Aluminum Oxide, Aluminum Oxide, Silicon Carbide
Grit Range:
Extra Coarse (XC), Coarse (C), Medium (M), Fine (F)
Machine Used:
DIE GRINDER
PORTABLE GRINDER
BENCH GRINDER
FLEXIBLE SHAFT GRINDER
The complete product category is described above. See Norton Full Line Catalog #7362 for entire offering.
Non-Woven Marking System ABRASIVE SILICON CARBIDE
ALUMINUM OXIDE
SHARPER, FINER/BRIGHTER SCRATCH PATTERN
MORE DURABLE, LONGER LASTING, POLISHED FINISH
GRIT SIZE
XC (50)
C (60-80)
M (100-150)
F (180-220)
FASTER, AGGRESSIVE CUT, ROUGHER FINISH
REDUCED CUT RATE, FINER FINISH
DENSITY
2
9
SOFT, OPEN, CONFORMABLE, LESS BURNING/LOADING
HARDER, MORE DURABLE, FASTER CUTTING, BETTER FINISH
TECH TIP
• Convolute wheels must always run in the direction indicated by the arrow printed on the side of each wheel. • Light to medium pressure is recommended. Excessive pressure may result in part damage. • Lubricants such as water-soluble oil and straight oil will decrease the heat and improve the surface finish and lustre.
It is the user’s responsibility to refer to and comply with ANSI B7.1
EZ Essentials Stock Abrasives Program
www.nortonabrasives.com
48
Powered by FlippingBook