Disc milling 335.16 cutters
R335.16 – inch
— For insert selection and cutting data recommendations, see page(s) 521-526 — For complete insert programme, see page(s) 841, 871 — For ISO attribute explanation, see page 16
Item number
Type of mounting DC CW CDX ZEFP ZNP DCONMS LF LS LUX OAL BD RPMX Weight Insert inch inch inch inch inch inch inch inch inch lbs
Designation
R335.16-00.97-3-0.39-2NA R335.16-01.25-3-0.48-2NA R335.16-01.47-3-0.63-2NA R335.16-01.84-3-0.83-2NA
02980638 Weldon 02980639 Weldon 02980640 Weldon 02980641 Weldon
0.969 0.387 0.232 2 4 1.249 0.477 0.275 2 4 1.469 0.626 0.330 2 5 1.844 0.823 0.389 2 6
0.750 2.528 2.307 1.063 3.543 0.453 24500 0.440 SPMX06.. 1.000 2.796 2.539 1.256 3.937 0.656 17600 0.880 LNK.08.. 1.000 3.190 2.539 1.633 4.331 0.748 14600 0.880 LNK.08.. 1.250 3.978 2.697 2.264 5.118 1.000 9800 1.760 LNK.08..
Spare Parts, included in delivery
Accessories
For cutter
Insert key
Insert screw
Key (T-handle)
Insert clamping torque
Torque key
ø 0.97
H4B-T07P H4B-T09P
C02205-T07P C73007-T09P
DOUBLE-T DOUBLE-T
0.9NM 2.0NM
T00-07P09
ø 1.25-1.84
T00-09P20 For best result it is recommended to let a stock allowance when machining the T-slot shank passage H = min 20% of the CW at the bottom of the T-slot. H= 0.2 x CW Torque and fixed keys, see page 905
520
secotools.com
Powered by FlippingBook