Helical milling Technical information
R 217 69 2532 3S04210 4 A 1 2 3 4 5 6 7 8 9 10 Code keys metric and inch
R 217 69 01.50 3 01.34 10 4 A 1 2 3 5 6 7 8 9 10
1.
2.
3.
Right hand rotation Cx = For Seco-Capto
215/217=With shank 220 = For Arbor 235 = Finishing
69 = Rectangular positive 2 cutting edges 94 = Tangential 4 cutting edges 59 = Square positive 4 cutting edges 15 = Finishing
4. (Not applicable for inch designation)
5.
6.
Shank diameter (except for Arbor type)
Cutter diameter
Shank type (except for Arbor type) 0 = Cylindrical 3 = Weldon
3S = Seco Weldon RE = Combimaster
7.
8.
9.
Max. axial cutting depht
Insert size xxS = short edge xxM = Medium edge xxL = Long edge xxH = Heavy duty
Effective No. of flutes (ZEFP)
10. A = With through coolant supply N = Coated S = Set H = Heavy Duty K = Full effective (for .59 only) R6 = Compatible with radius 6.3 mm (for .59 only)
Dimensions in mm
Dimensions in inch
DCB DCSFMS DBC1 DBC2 KWW C
DCB 0.500 0.750 1.000 1.250 1.500 2.000
DCSFMS
DBC1 DBC2 KWW C
1.181 - 1.378 1.378 - 1.850 1.803 - 2.441 2.250 - 3.031 2.750 - 3.543
0.258 0.165 0.321 0.193 0.382 0.224 0.508 0.287 0.630 0.382 0.756 0.445 1.000 0.551
16 22 27 32 40 60
30-35 42-47 48-62 60-90
– – – –
– – – – –
8,4
5,6 6,3
– – – – –
– – – – –
10,4 12,4 14,4 16,4 25,7
7 8 9
90-130 66,7
4.331
130-270 101,6 177,8
14
2.500 5.118 - 6.299 (8.858)
4.000 (7.000)
For a more exact DCSFMS and DCB measurement, see each product table.
115
secotools.com
Powered by FlippingBook