SBN10
Economical high-speed milling cutters with inserts BNGX 10T3..
Productive milling cutters for high feed machining. Milling from mild stainless to hardened tool steels. Newly extended with Ø 50 – Ø 66 mm. HFC cutters of smaller diameters for use of double-sided inserts BNGX 10 with 4 bits. Max. depth of cut 1 mm. The recommended average chip thickness is from 0.17 to 0.41 mm. The cutters have a wide application range. Shell mill cutters and the majority of endmills style cutters from Ø 25 have variable tooth pitch. All offered cutters have an internal cooling. The range of SBN10 milling cutters has been supplemented by shell mill cutters from Ø 50 to 66 mm. Similar to the new cutters, they are offered in two variants of tooth pitch. The new cutters from Ø 50 have an adjustment angle of 29°, the new cutters up to Ø 42 mm have an adjustment angle of 20°. This change ensures optimum chip evacuation when milling with all diameters along the wall. They are ideal for produc- tive material removal.
SBN10 CUTTERS ON THE WEB
Shell mill cutters DCX = 40 – 66 mm
SBN10 FEATURES AND BENEFITS Comprehensive range of high feed milling cutters in sizes from Ø 16 to 66 mm
Large selection of cutters. Cylindrical shank cutters in different lengths, multiple tooth density variations throughout the range Long tool life of the inserts thanks to optimised setting angle preventing excessive cutting of the inserts The new cutters with a 29° setting angle are compatible with BNGX 10 inserts. ANHX 10 cannot be used!
Modular milling cutters DCX = 16 – 40 mm
Cylindrical milling cutters DCX = 16 – 35 mm
BNGX 10T3..
BASIC GEOMETRY OF BNGX 10T3..
M
Universal geometry for milling mild steel and cast iron
MM Optimised geometry for mild stainless and low carbon steels and non-ferrous materials
Optimized geometry for stainless steels, tool steels in natural condition, cast irons and unstable conditions
HM
ANOTHER INSERTS
Inserts for conventional 90° milling up of material along the wall. Only for DCX = 16 and 42 mm cutters.
ANHX 10T3
BNGX INSERTS ON THE WEB
16
Powered by FlippingBook