SHN09C
Economic milling cutters with double-sided inserts HNGX 0906..
Economical double-sided inserts with 12 cutting edges. Face milling cutters suitable for machining steel and harder materials. Pramet SHN09C are 45° highly productive and econom- ical milling cutters for the use of double-sided HNGX 09 inserts with a maximum depth of cut of 5 mm. The recommended average chip thickness is from 0.08 to 0.25 mm. The cutters are particularly suitable for face and chamfer milling. Most of the cutters are made with differential tooth pitch, with the exception of the Ø 100 10-tooth and Ø 125 12-tooth cutters. All cutters offered have an internal cooling.
SHN09C CUTTERS ON THE WEB
Shell mill cutters DC = 50 – 315 mm
HNGX 0906..
BASIC GEOMETRY OF HNGX 0906
F
Light and finishing operations in steels, also applicable for stainless steels
Optimised F geometry for finishing operations, higher surface finish and reduced burr formation
FF
M
Positive geometry for the medium machining.
Durable geometry for medium and heavy machining, also suitable for hardened materials
R
INSERTS TO IMPROVE SURFACE QUALITY
Wiper geometry for better surface finish when milling with bigger cutters and higher feeds
XNGX 0906
HNGX INSERTS ON THE WEB
15
Primary use
Possible use
Powered by FlippingBook