SOE06Z
Universal and economical milling cutters with positive inserts OEHT 0604
Economical version of the universal face milling cutter – with 8cutting edges inserts. Optimized for mild stainless steels. Also suitable for less stable workpieces. Pramet SOE06Z are highly productive 43° universal milling cutters for the use of pos- itive inserts and a maximum depth of cut
SOE06Z CUTTERS ON THE WEB
of 4 mm. The recommended average chip thickness is from 0.06 to 0.22 mm. The cutters are suitable for face/chamfer milling and copy milling operations (only with REHT 1604 in- serts). All cutters are made with differential tooth pitch and have an internal cooling
Shell mill cutters DC = 50 – 200 mm
OEHT 0604..
BASIC GEOMETRY OF OEHT 0604..
Universal geometry for milling materials from soft to medium hard steel including stainless steels Sharp geometry for light milling of mild stainless steels, also suitable for machining low carbon steels and non-ferrous materials Sharp geometry for light and medium milling of mild stainless steels, also suitable for machining low carbon steels and non-ferrous materials
M
MF
MM
FA
Alternative for adhesive non-ferrous materials, especially aluminium and its soft alloys
INSERTS TO IMPROVE SURFACE QUALITY AND ROUND INSERTS
XEHT 0604..
Wiper geometry for better surface finish
Round inserts R8 for copy or face milling with M and MM geometries
REHT 1604 ..
OEHT INSERTS ON THE WEB
13
Primary use
Possible use
Powered by FlippingBook