SSD13F
Universal face mill cutters with positive inserts SD.T 13T3..
Highly versatile 45° face milling cutter – for positive inserts type SD.. 13 and max. depth of cut 6.4 mm. The recommended aver- age chip thickness is 0.04 mm for endmills and 0.32 mm for shell mills. The cutters are particularly suitable for face and chamfer milling. Most of the cutters from Ø 50 onwards are made with differential tooth pitch. Exceptions are the Ø 100 cutters with 10 teeth and the Ø 125 mm cutters with 12 teeth. All offered cutters have an internal cooling.
SSD13F CUTTERS ON THE WEB
Weldon cutters DC = 32 – 40 mm
Shell mill cutters DC = 40 – 250 mm
SSD13F FEATURES AND BENEFITS Universal 45° cutters without compromise, suitable for a wide range of materials and cutter sizes For cutters from Ø 100 onwards we offer variant with two teeth density. Medium for light machining and unstable conditions and higher for more productive milling The carbide shim provides additional protection and high resistance of the cutter body, which at the same time provides stability of the insert and safety of the process Complemented by a wide range of ground and directly-pressed inserts in PVD and CVD coated materials, including an uncoated polished version of the aluminium geometry
SD.T 13T3..
BASIC GEOMETRY OF SDMT 13T3..
M
Universal geometry for milling a wide range of materials including stainless steels
Geometry suitable for unstable cutting conditions as well as for roughing operations, also suitable for cast irons and stainless steels
R
BASIC GEOMETRY OF GRINDED INSERTS SDET 13T3..
F The choice for light milling and finishing milling, geometry also suitable for soft materials
FA Alternative for adhesive non-ferrous materials, especially aluminium and its soft alloys
INSERTS TO IMPROVE SURFACE QUALITY
Wiper geometry for better surface finish when milling with bigger diameter cutters and higher feeds
XDET 13T3..
SD.T 13T3 INSERTS ON THE WEB
11
Primary use
Possible use
Powered by FlippingBook