Suitability and starting values for cutting speed (vc), feed (f) and depth of cut (ap). Refer to our cutting conditions app for further options.
P
M
K
N
S
H
RE
Product
MID
vc
f
ap
vc
f
ap
vc
f
ap
vc
f
ap
vc
f
ap
vc
f
ap
(inch)
(ft/min) (in/rev)
(inch)
(ft/min) (in/rev)
(inch)
(ft/min) (in/rev)
(inch)
(ft/min) (in/rev)
(inch)
(ft/min) (in/rev)
(inch)
(ft/min) (in/rev)
(inch)
..A flat insert is designed for medium machining of Cast irons. It features neutral rake angle without T-land. It’s also conditionally suitable for Hard materials.
E
CNMA 432 CNMA 433
T8415 T8415
.031 .047
– – – – – – 476 .0079 .157 – – – – – – 443 .0118 .157
– – – – – – 82 .0055 .02 8552986 – – – – – – 82 .0083 .02 8552987
..A flat insert is designed for medium machining of Cast irons. It features neutral rake angle without T-land. It’s also conditionally suitable for Hard materials.
E
DNMA 441 DNMA 442
T8415 T8415
.016 .031
– – – – – – 427 .0039 .067 – – – – – – 410 .0079 .067
– – – – – – 82 .0028 .02 8553076 – – – – – – 66 .0055 .02 8553077
..A flat insert is designed for medium machining of Cast irons. It features neutral rake angle without T-land. It’s also conditionally suitable for Hard materials.
E
SNMA 432
T8415
.031
– – – – – – 492 .0079 .157
– – – – – – 82 .0055 .02 8553106
..A flat insert is designed for medium machining of Cast irons. It features neutral rake angle without T-land. It’s also conditionally suitable for Hard materials.
E
TNMA 332 TNMA 432
T8415 T8415
.031 .031
– – – – – – 443 .0079 .059 – – – – – – 427 .0079 .079
– – – – – – 82 .0055 .02 8553117 – – – – – – 82 .0055 .02 8553118
..A flat insert is designed for medium machining of Cast irons. It features neutral rake angle without T-land. It’s also conditionally suitable for Hard materials.
E
WNMA 432 WNMA 433
T8415 T8415
.031 .047
– – – – – – 476 .0079 .157 – – – – – – 443 .0118 .157
– – – – – – 82 .0055 .02 8553148 – – – – – – 82 .0083 .02 8553149
Primary use
Possible use
55
Powered by FlippingBook