Suitability and starting values for cutting speed (vc), feed (f) and depth of cut (ap). Refer to our cutting conditions app for further options.
P
M
K
N
S
H
RE
Product
MID
vc
f
ap
vc
f
ap
vc
f
ap
vc
f
ap
vc
f
ap
vc
f
ap
(inch)
(ft/min) (in/rev)
(inch)
(ft/min) (in/rev)
(inch)
(ft/min) (in/rev)
(inch)
(ft/min) (in/rev)
(inch)
(ft/min) (in/rev)
(inch)
(ft/min) (in/rev)
(inch)
NM chip breaker is sharp and designed for medium machining of Steels, Stainless steels and Super-alloys. It features highly positive rake angle and positive, moderate T-land. It’s also conditionally suitable for Non-ferrous alloys.
1
S
CNMG 432-NM
T8415
.031
804 .0098 .083 410 .0089 .083
– – – 2018 .0118 .083 180 .0079 .066
– – – 8553064
NM chip breaker is sharp and designed for medium machining of Steels, Stainless steels and Super-alloys. It features highly positive rake angle and positive, moderate T-land. It’s also conditionally suitable for Non-ferrous alloys.
1
S
DNMG 332-NM
T8415
.031
705 .0098 .031 361 .0089 .031
– – – 1772 .0118 .031 148 .0079 .025
– – – 8553085
NM chip breaker is sharp and designed for medium machining of Steels, Stainless steels and Super-alloys. It features highly positive rake angle and positive, moderate T-land. It’s also conditionally suitable for Non-ferrous alloys.
1
S
TNMG 332-NM TNMG 432-NM
T8415 T8415
.031 .031
705 .0098 .075 361 .0089 .075 705 .0098 .067 361 .0089 .067
– – – 1772 .0118 .075 148 .0079 .06 – – – 1772 .0118 .067 148 .0079 .054
– – – 8553128 – – – 8553136
NM chip breaker is sharp and designed for medium machining of Steels, Stainless steels and Super-alloys. It features highly positive rake angle and positive, moderate T-land. It’s also conditionally suitable for Non-ferrous alloys.
1
S
VNMG 331-NM VNMG 332-NM
T8415 T8415
.016 .031
525 .0079 .047 279 .0071 .047 591 .0098 .055 295 .0089 .055
– – – 1329 .0094 .047 115 .0079 .038 – – – 1476 .0118 .055 131 .0079 .044
– – – 8553142 – – – 8553145
NM chip breaker is sharp and designed for medium machining of Steels, Stainless steels and Super-alloys. It features highly positive rake angle and positive, moderate T-land. It’s also conditionally suitable for Non-ferrous alloys.
1
S
WNMG 433-NM
T8415
.047
804 .0118 .083 410 .0106 .083
– – – 2018 .0142 .083 180 .0094 .066
– – – 8553167
Primary use
Possible use
53
Powered by FlippingBook