Suitability and starting values for cutting speed (vc), feed (f) and depth of cut (ap). Refer to our cutting conditions app for further options.
P
M
K
N
S
H
RE
Product
MID
vc
f
ap
vc
f
ap
vc
f
ap
vc
f
ap
vc
f
ap
vc
f
ap
(inch)
(ft/min) (in/rev)
(inch)
(ft/min) (in/rev)
(inch)
(ft/min) (in/rev)
(inch)
(ft/min) (in/rev)
(inch)
(ft/min) (in/rev)
(inch)
(ft/min) (in/rev)
(inch)
.076
SF chip breaker is sharp and the first choice for finishing of Stainless steels and Super-alloys. It features slightly positive rake angle without T-land. It’s also suitable for Steels, Cast irons and Hard materials, and conditionally for Non-ferrous alloys.
E
14.5°
CNGG 430.5-SF
T8415
.008 820 .0039 .039 427 .0035 .039 738 .0039 .039 2067 .0047 .039 180 .0031 .031 131 .0039 .006 8552985
.076
SF chip breaker is sharp and the first choice for finishing of Stainless steels and Super-alloys. It features slightly positive rake angle without T-land. It’s also suitable for Steels, Cast irons and Hard materials, and conditionally for Non-ferrous alloys.
E
14.5°
CNMG 431-SF CNMG 432-SF CNMG 433-SF
T8415 T8415 T8415
.016 787 .0059 .039 410 .0053 .039 705 .0059 .039 1969 .0071 .039 180 .0047 .031 131 .0041 .013 8553060 .031 837 .0079 .039 443 .0071 .039 755 .0079 .039 2116 .0094 .039 180 .0055 .031 148 .0039 .026 8553066 .047 820 .0098 .059 427 .0089 .059 738 .0098 .059 2067 .0118 .059 180 .0069 .047 131 .0049 .039 8553069
.076
SF chip breaker is sharp and the first choice for finishing of Stainless steels and Super-alloys. It features slightly positive rake angle without T-land. It’s also suitable for Steels, Cast irons and Hard materials, and conditionally for Non-ferrous alloys.
E
14.5°
DNMG 331-SF DNMG 332-SF DNMG 431-SF DNMG 432-SF DNMG 441-SF DNMG 442-SF DNMG 443-SF
T8415 T8415 T8415 T8415 T8415 T8415 T8415
.016 623 .0059 .031 328 .0053 .031 558 .0059 .031 1575 .0071 .031 131 .0047 .025 98 .0041 .013 8553081 .031 722 .0067 .031 377 .006 .031 656 .0067 .031 1821 .008 .031 164 .0054 .025 115 .0044 .026 8553086 .016 591 .0059 .059 295 .0053 .059 525 .0059 .059 1476 .0071 .059 131 .0047 .047 98 .0041 .013 8553088 .031 689 .0067 .059 361 .006 .059 623 .0067 .059 1722 .008 .059 148 .0054 .047 115 .0044 .026 8553090 .016 591 .0059 .059 295 .0053 .059 525 .0059 .059 1476 .0071 .059 131 .0047 .047 98 .0041 .013 8553095 .031 689 .0067 .059 361 .006 .059 623 .0067 .059 1722 .008 .059 148 .0054 .047 115 .0044 .026 8553102 .047 640 .0098 .059 328 .0089 .059 591 .0098 .059 1624 .0118 .059 148 .0069 .047 98 .0049 .035 8553104
.076
SF chip breaker is sharp and the first choice for finishing of Stainless steels and Super-alloys. It features slightly positive rake angle without T-land. It’s also suitable for Steels, Cast irons and Hard materials, and conditionally for Non-ferrous alloys.
E
14.5°
SNMG 432-SF SNMG 433-SF
T8415 T8415
.031 902 .0079 .039 459 .0071 .039 820 .0079 .039 2264 .0094 .039 197 .0055 .031 148 .0039 .026 8553110 .047 853 .0098 .059 443 .0089 .059 787 .0098 .059 2165 .0118 .059 197 .0069 .047 148 .0049 .039 8553113
.076
SF chip breaker is sharp and the first choice for finishing of Stainless steels and Super-alloys. It features slightly positive rake angle without T-land. It’s also suitable for Steels, Cast irons and Hard materials, and conditionally for Non-ferrous alloys.
E
14.5°
TNMG 331-SF TNMG 332-SF TNMG 333-SF TNMG 431-SF TNMG 432-SF TNMG 433-SF
T8415 T8415 T8415 T8415 T8415 T8415
.016 640 .0059 .051 328 .0053 .051 591 .0059 .051 1624 .0071 .051 148 .0047 .041 98 .0041 .013 8553123 .031 738 .0067 .051 377 .006 .051 673 .0067 .051 1870 .008 .051 164 .0054 .041 115 .0044 .026 8553130 .047 689 .0098 .059 361 .0089 .059 623 .0098 .059 1722 .0118 .059 148 .0069 .047 115 .0049 .035 8553132 .016 607 .0067 .067 312 .006 .067 541 .0067 .067 1526 .008 .067 131 .006 .054 98 .0047 .013 8553134 .031 722 .0067 .067 377 .006 .067 656 .0067 .067 1821 .008 .067 164 .006 .054 115 .0047 .026 8553137 .047 640 .0118 .067 328 .0106 .067 591 .0118 .067 1624 .0142 .067 148 .0083 .054 98 .0059 .035 8553139
Primary use
Possible use
46
Powered by FlippingBook