7° .021
FF2
FF2 chip breaker is sharp and the first choice for fine-finishing of Steels. It features slightly positive rake angle without T-land. It’s also suitable for Cast irons.
E
VCGT
VCGX
IC
D1
L
S
IC
D1
L
S
(inch) .156
(inch) .087
(inch) .272
(inch) .094
(inch) .313
(inch) .134
(inch) .543
(inch) .125
1.21.5
2.52
L
L
S
S
Suitability and starting values for cutting speed (vc), feed (f) and depth of cut (ap). Refer to our cutting conditions app for further options.
P
M
K
N
S
H
RE
Product
MID
vc
f
ap
vc
f
ap
vc
f
ap
vc
f
ap
vc
f
ap
vc
f
ap
(inch)
(ft/min) (in/rev)
(inch)
(ft/min) (in/rev)
(inch)
(ft/min) (in/rev)
(inch)
(ft/min) (in/rev)
(inch)
(ft/min) (in/rev)
(inch)
(ft/min) (in/rev)
(inch)
7° .021
FF2 chip breaker is sharp and the first choice for fine-finishing of Steels. It features slightly positive rake angle without T-land. It’s also suitable for Cast irons.
E
VCGT 1.21.50.5-FF2 VCGT 1.21.51-FF2
T8415 T8415
.008 .016
607 .002 .031 509 .0047 .031
– – – 541 .002 .031 – – – 459 .0047 .031
––– ––– –––8553267 ––– ––– –––8553269
7° .021
FF2 chip breaker is sharp and the first choice for fine-finishing of Steels. It features slightly positive rake angle without T-land. It’s also suitable for Cast irons.
E
VCGX 2.520.2FR-FF2 VCGX 2.520FR-FF2
T8415 T8415
.004 .000
591 .002 .039 591 .002 .039
– – – 525 .002 .039 – – – 525 .002 .039
––– ––– –––8553287 ––– ––– –––8553285
7° .021
FF2 chip breaker is sharp and the first choice for fine-finishing of Steels. It features slightly positive rake angle without T-land. It’s also suitable for Cast irons.
E
VCGX 2.520.2FL-FF2 VCGX 2.520FL-FF2
T8415 T8415
.004 .000
591 .002 .039 591 .002 .039
– – – 525 .002 .039 – – – 525 .002 .039
––– ––– –––8553286 ––– ––– –––8553284
Primary use
Possible use
30
Powered by FlippingBook