Vision Measuring Systems
QV TP Active/QV TP Pro CNC Vision Measuring System Equipped with a Touch Trigger Probe Non-contact and contact measurement on one machine • QV touch-trigger probe unit enables both vision measurement and touch-trigger probe measurement. 3D workpiece measurement • Enables 3D measurement of workpieces, such as press-molded products, plastic-molded products, and machined products, that, until now, could not be measured with image processing alone. Module change rack available • Using the module change rack enables switching between vision measurement and touch probe measurement during an automatic measuring sequence.
QV TP HYPER 404 Pro
PH6 TP200
Master ball
Calibration ring
Module change rack, MCR20
SPECIFICATIONS WITH TOUCH-TRIGGER PROBE OPTIONS MOUNTED Model No. Items QV TP Active 202
Refer to the QUICK VISION Series Brochure ( 2316 ) for more details.
QV TP Active 404 400×400×200 mm 16”x16”x8” 334×400×200 mm 13”x16”x8” ( 2.4 + 3L/1000 ) µm
250×200×150 mm 10”x8”x6” 184×200×150 mm 7.25”x8”x6” ( 2.4 + 3L/1000 ) µm
Vision
Measuring range* 1 (X×Y×Z)
Common to Touch-trigger Probe
Measuring accuracy* 2 (Touch-trigger probe)
E 1X , E 1Y , E 1Z
Model No.
QV TP APEX 302 Pro QV TP APEX 404 Pro QV TP APEX 606 Pro QV TP HYPER 302 Pro QV TP HYPER 404 Pro QV TP HYPER 606 Pro
Items
400×400×250 mm 16”x16”x10” 334×400×250 mm 13”x16”x10”
300×200×200 mm 12”x8”x8” 234×200×200 mm 9”x8”x8”
400×400×250 mm 16”x16”x10” 334×400×250 mm 13”x16”x10”
600×650×250 mm 24”x26”x10” 534×650×250 mm 21”x26”x10”
300×200×200 mm 12”x8”x8” 234×200×200 mm 9”x8”x8”
600×650×250 mm 24”x26”x10” 534×650×250 mm 31”x26”x10”
Vision
Measuring range* 1 (X×Y×Z)
Common to Touch-trigger Probe
E X , MPE /E Y , MPE / E Z , MPE
Measuring accuracy* 2 (Touch-trigger probe)
(1.8 + 3L/1000) µm
(1.7 + 3L/1000) µm
*1 When a module change rack, a master ball, and a calibration ring are mounted, the measurement ranges are smaller than those in the table. Other specifications are the same as those for QV Active , QV APEX Pro , and QV HYPER Pro . Please contact your nearest M³ Solution Center for more details. *2 L=length between two arbitrary points (mm)
M
Talk to Sales
M-7
Powered by FlippingBook