Coordinate Measuring Systems Precision measuring technology in three dimensions
Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink ® (refer to page A-3 for details). Status monitoring boosts uptime with timely adjustments and alerts for events like busy, idle, or maintenance. Operators can optimize machine use and repurpose idle instruments for measuring other parts.
PH20 5-axis control touch-trigger system Thanks to unique "head touches", it is possible to measure by movement of the probe head itself instead of moving the CMM elements. Also, measuring time can be significantly shortened by means of 5-axis concurrent movement and stepless positioning angle.
Probe heads PH10M/10MQ Motorized probe heads
PH6M Fixed probe head A fixed probe head with autojoint connector for use with TP7 , SP25M , and QVP .
These heads allow automatic control of positioning (up to 720 directions) of the mounted probe. It is possible to mount not only a touch-trigger probe but also any scanning probe, vision probe, laser probe, screw-thread depth probe, etc. Auto-changing is available (optional).
s Mounting example of touch-trigger probe
SP25M modules and stylus holders The SP25M's compact size and auto-joint mounting makes it compatible with the PH10M PLUS / PH10MQ PLUS and PH6M probe heads. It can also be mounted on a multi-wired probe extension bar. Together, these combinations permit excellent reach and access to part features. A range of module kits allows SP25M users to build up their probing capability over time. Each SM25-# scanning module is optimized in terms of gain and spring rate to suit the range of stylus lengths specified. For every module, there is a matching SH25-# stylus holder. The SH25-3 and SH25-4 stylus holders are constructed with a fixed carbon fiber stem to which an M3 stylus is mounted, selected to provide the correct working length. While the SP25M can carry cranked (non straight) styli configurations when using SM25-1 / 2 / 3 / 4 / 5 scanning modules and the original standard stylus holders (SH25-1 / 2 / 3 / 4 / 5), for optimum metrology where larger offsets are required Renishaw recommends the SH25-2A / 3A / 4A range of stylus holder, specifically designed to meet the challenges posed by such stylus arrangements. SP25M Scanning Probe The SP25M combines two sensors in a single housing. Users can switch between a choice of five scanning modules (which can carry M3 styli with lengths from 20 mm to 400 mm) and the TM25-20 adapter module that is compatible with Renishaw’s TP20 range of probe modules. This capability enables scanning and touch- trigger probing in a single probe system.
L
Need Service?
L-16
Powered by FlippingBook