Coordinate Measuring Systems Precision measuring technology in three dimensions
Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink ® (refer to page A-3 for details). Status monitoring boosts uptime with timely adjustments and alerts for events like busy, idle, or maintenance. Operators can optimize machine use and repurpose idle instruments for measuring other parts.
High Accuracy CNC CMM STRATO-Apex Series
• The STRATO-Apex Series of CNC CMMs offer improved structural rigidity and guide systems to guarantee very high accuracy measurement. High drive speed and high acceleration provide lower cycle times in critical measurement applications.
• The STRATO-Apex Series uses the same ultra-high accuracy length measuring unit (manufactured in-house) as used in the LEGEX Series for position detection, allowing for extremely advanced position detection and enabling control of these ultra-high- accuracy machines. It also applies various other technologies, such as a high-speed control program, that enable high speed and accuracy.
MRT240 Rotary table diameter 240 mm
STRATO-Apex 574
STRATO-Apex 7106
MRT320 Rotary table diameter 320 mm
STRATO-Apex 162016
STRATO-Apex 9166
SPECIFICATIONS
25.4 mm = 1.0 inch
Model
STRATO-Apex 574
STRATO-Apex 776
STRATO-Apex 7106
Items
X-axis Y-axis Z-axis
500 mm 700 mm 400 mm
700 mm
Measuring range
700 mm
1000 mm
600 mm
STRATO-Apex 9106
STRATO-Apex 9166
STRATO-Apex 162012
STRATO-Apex 162016
STRATO-Apex 163012
STRATO-Apex 163016
Model
Items
X-axis Y-axis
900 mm
1600 mm
Measuring range
1000 mm 1600 mm
2000 mm
3000 mm
L
Z-axis 1200 mm 1600 mm 1200 mm 1600 mm Note: While the appearance of the natural stone measuring table varies according to the source, the high stability for which this material is known, can always be relied upon. 600 mm
STRATO-Apex Series Accuracy
Unit: μm
*1 Specifications vary by configuration, size, and thermal environment. *2 L = Measuring length (unit: mm) *3 ( ) indicates Z: 1600 mm specification
Length measurement error* 1 ISO 10360-2: 2009
Series
Probe used
574 Series
E 0, MPE =0.7 + 2.5L/1000* 2
700 / 900 Series
SP25M
E 0, MPE =0.9 + 2.5L/1000* 2
Talk to Sales
1600 Series
E 0, MPE =2.5 + 4.0L/1000 (3.0 + 4.0L/1000)* 2 * 3
L-7
Powered by FlippingBook